Difficulty

Easy

Steps

3

Time Required

                          30 minutes

Sections

1

  • Charging Port
  • 3 steps

Flags

0

  • BackSamsung Galaxy Note 10.1 2012

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Charging Port
  • This is the back of the device and where you will begin to take it apart.
  • It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.
  • Use a metal spudger to pop up the corner of the silver piece.
  • Use the plastic opening tools to pry along the edges of the silver piece.
  • Lift up the silver piece to reveal the rest of the back cover.

This is the back of the device and where you will begin to take it apart.

It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.

Use a metal spudger to pop up the corner of the silver piece.

Use the plastic opening tools to pry along the edges of the silver piece.

Lift up the silver piece to reveal the rest of the back cover.

1024

Step 2

  • Remove the three 5mm screws indicated by the red circles with the Philips #00 Screwdriver.
  • Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.
  • Remove the back cover.
  • At this point use anti-static gloves or do NOT take it apart on carpet.

Remove the three 5mm screws indicated by the red circles with the Philips #00 Screwdriver.

Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.

Remove the back cover.

At this point use anti-static gloves or do NOT take it apart on carpet.

Step 3

  • Remove the three 2 mm screws indicated by the red circles with the Phillips #00 screwdriver.
  • Pull the charging port indicated by the orange rectangle in picture two out from its position.
  • Unplug the black motherboard connector as indicated in the third picture.
  • Replace the charging port with a similar model.

Remove the three 2 mm screws indicated by the red circles with the Phillips #00 screwdriver.

Pull the charging port indicated by the orange rectangle in picture two out from its position.

Unplug the black motherboard connector as indicated in the third picture.

Replace the charging port with a similar model.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Gavin Tipker

Member since: 11/01/2018

193 Reputation

                                      2 Guides authored                  



                       Badges:
                       2

Team

                       IUPUI, Team S3-G1, Harley Fall 2018                        

                                                  Member of IUPUI, Team S3-G1, Harley Fall 2018 



                    IUPUI-HARLEY-F18S3G1                     


                                            3 Members                     


                                            2 Guides authored