Samsung Galaxy Note 10 1 Microsd Port Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          20 minutes            

Sections

1

• microSD Port
• 3 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSamsung Galaxy Note 10.1 2012

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Removing the Top Piece               

• This is the back of the device and where you willl begin to take it apart
• It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.
• Use the plastic opening tools to pry along the indicated box.
• Lift up the silver piece to reveal the rest of the back cover.

This is the back of the device and where you willl begin to take it apart

It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.

Use the plastic opening tools to pry along the indicated box.

Lift up the silver piece to reveal the rest of the back cover.

1024

Step 2

              Removing the Back Cover               

• Unscrew the three 5 mm screws indicated by the red circles with the Philips #00 screwdriver.
• Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.
• Remove the back cover.
• At this point use anti-static gloves or do NOT take it apart on carpet.

Unscrew the three 5 mm screws indicated by the red circles with the Philips #00 screwdriver.

Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.

Remove the back cover.

At this point use anti-static gloves or do NOT take it apart on carpet.

Step 3

              Removing the microSD Port               

• Unscrew the two 2 mm screws indicated by the red circles with the #00 Philips Screwdriver.
• Starting with the black motherboard connector, remove the module indicated by the red box in the second picture.
• Replace the microSD port with a similar model.

Unscrew the two 2 mm screws indicated by the red circles with the #00 Philips Screwdriver.

Starting with the black motherboard connector, remove the module indicated by the red box in the second picture.

Replace the microSD port with a similar model.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Tyler Salomone                     

Member since: 09/22/2014

1,024 Reputation

                                      3 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       USF Tampa, Team 3-7, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 3-7, Brown Fall 2014 



                    USFT-BROWN-F14S3G7                     


                                            3 Members                     


                                            9 Guides authored                     

Dan Brown - Nov 14, 2014

Reply

Be sure to include screw lengths to the nearest mm on all guides.

John Peterson - Nov 17, 2014

Reply

In this guide, you missed a step on removing the battery.