Samsung Galaxy Note 10 1 Rear Facing Camera Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 minutes

Sections

Rear Facing Camera
3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackSamsung Galaxy Note 10.1 2012
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Removing the Top Piece

This is the back of the device and where you willl begin to take it apart
It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.
Use the plastic opening tools to pry along the indicated box.
Lift up the silver piece to reveal the rest of the back cover.

This is the back of the device and where you willl begin to take it apart

It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.

Use the plastic opening tools to pry along the indicated box.

Lift up the silver piece to reveal the rest of the back cover.

1024

Step 2

              Removing the Back Cover

Unscrew the three screws indicated by the red circles with the Philips #00 screwdriver.
Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.
Remove the back cover.
At this point use anti-static gloves or do NOT take it apart on carpet.

Unscrew the three screws indicated by the red circles with the Philips #00 screwdriver.

Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.

Remove the back cover.

At this point use anti-static gloves or do NOT take it apart on carpet.

Step 3

              Removing the Camera

Start by lifting the white connector to remove the part indicated by the red polygon.
Gently pry along the camera hub to lift it out of its location.
This is your camera. Replace it with the new part.

Start by lifting the white connector to remove the part indicated by the red polygon.

Gently pry along the camera hub to lift it out of its location.

This is your camera. Replace it with the new part.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors

                    Bryan Fernandez

Member since: 09/22/2014

241 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team 3-7, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 3-7, Brown Fall 2014 



                    USFT-BROWN-F14S3G7                     


                                            3 Members                     


                                            9 Guides authored

Better Introduction#

What you need#

#

#

#

#

#

Team#

#

Better Introduction

What you need

Team