Samsung Galaxy Note 10 1 Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Speaker
7 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

BackSamsung Galaxy Note 10.1 2012
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Removing the Top Piece

This is the back of the device and where you willl begin to take it apart
It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.
Use the plastic opening tools to pry along the indicated box.
Lift up the silver piece to reveal the rest of the back cover.

This is the back of the device and where you willl begin to take it apart

It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.

Use the plastic opening tools to pry along the indicated box.

Lift up the silver piece to reveal the rest of the back cover.

1024

Step 2

              Removing the Back Cover

Unscrew the three 5 mm screws indicated by the red circles with the Philips #00 screwdriver.
Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.
Remove the back cover.
At this point use anti-static gloves or do NOT take it apart on carpet.

Unscrew the three 5 mm screws indicated by the red circles with the Philips #00 screwdriver.

Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.

Remove the back cover.

At this point use anti-static gloves or do NOT take it apart on carpet.

Step 3

              Removing Ribbons Covering the Battery

Carefully remove all of the ribbons that connect over the battery from the locations indicated by the yellow circles.

Carefully remove all of the ribbons that connect over the battery from the locations indicated by the yellow circles.

Step 4

              Removing the Battery

Remove all of the 3 mm screws indicated by a red circle with the #00 Philips screwdriver.
Disconnect the battery from the location indicated by a yellow circle
Now you may remove the battery.

Remove all of the 3 mm screws indicated by a red circle with the #00 Philips screwdriver.

Disconnect the battery from the location indicated by a yellow circle

Now you may remove the battery.

Step 5

              Removing the Components Around the Motherboard

From the first photo:
Remove all the components marked by yellow circles
Unscrew all the 2 and 3 mm screws marked by the red circles with the #00 Philips screwdriver.
From the second photo:
Starting with the motherboard connectors, remove all the components marked in red.
Please place all components removed after this point in a static-free area or in anti-static bags.
Please note that you can only remove the ribbon attached to the headphone jack and the metal covering it on the far left. Do not attempt to remove the whole piece at this time.

From the first photo:

Remove all the components marked by yellow circles

Unscrew all the 2 and 3 mm screws marked by the red circles with the #00 Philips screwdriver.

From the second photo:

Starting with the motherboard connectors, remove all the components marked in red.

Please place all components removed after this point in a static-free area or in anti-static bags.

Please note that you can only remove the ribbon attached to the headphone jack and the metal covering it on the far left. Do not attempt to remove the whole piece at this time.

Step 6

              Removing the Motherboard

Once you have removed all the components connected to the motherboard, gently lift up on the area surrounding the green box and remove your motherboard.
Please place the motherboard in a static-free area or in anti-static bags.

Once you have removed all the components connected to the motherboard, gently lift up on the area surrounding the green box and remove your motherboard.

Please place the motherboard in a static-free area or in anti-static bags.

Step 7

              Remove the loudspeaker modules

Apply pressure to the locations boxed in red to remove the loudspeaker modules.
These are your loudspeaker modules, replace with the new parts

Apply pressure to the locations boxed in red to remove the loudspeaker modules.

These are your loudspeaker modules, replace with the new parts

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 4 other contributors

                    Bryan Fernandez

Member since: 09/22/2014

241 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team 3-7, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 3-7, Brown Fall 2014 



                    USFT-BROWN-F14S3G7                     


                                            3 Members                     


                                            9 Guides authored

Dan Brown - Nov 14, 2014

I wouldn’t say that a guide “hopes” to do anything.

John Peterson - Nov 17, 2014

In Step 7, mention that you should use the plastic tools to pop the speakers out of the device.

Action Shots#

Better Introduction#

What you need#

Team#

Action Shots

Better Introduction

What you need

Team