Difficulty
Moderate
Steps
10
Time Required
Suggest a time??
Sections
6
- Rear Case
- 2 steps
- Battery
- 1 step
- S Pen
- 1 step
- Midframe
- 2 steps
- Motherboard
- 3 steps
- Rear Facing Camera
- 1 step
Flags
0
BackSamsung Galaxy Note 3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the rear case
- Insert a fingernail or plastic opening tool in the gap between the rear case and the base of the phone.
Insert a fingernail or plastic opening tool in the gap between the rear case and the base of the phone.
1024
Step 2
Remove Case from the Base
- Slide your fingernail or plastic opening tool along the edge of the rear case.
- Lift the case gently from the base.
Slide your fingernail or plastic opening tool along the edge of the rear case.
Lift the case gently from the base.
Step 3
Battery
- Insert a fingernail or plastic opening tool into the small gap between the battery and the phone base.
- Lift the battery out of its recess.
Insert a fingernail or plastic opening tool into the small gap between the battery and the phone base.
Lift the battery out of its recess.
Step 4
S Pen
- Place your fingernail in the groove of the stylus pen.
- Pull the stylus pen away from the phone.
Place your fingernail in the groove of the stylus pen.
Pull the stylus pen away from the phone.
Step 5
Unscrew Back Chassis
- Remove the twelve 4mm Phillips #00 screws from the back chassis.
Remove the twelve 4mm Phillips #00 screws from the back chassis.
Step 6
Remove Back Chassis
- Insert the plastic opening tool into the Stylus Pen placement holder.
- Lift the plastic opening tool so that the midframe separates from the base.
Insert the plastic opening tool into the Stylus Pen placement holder.
Lift the plastic opening tool so that the midframe separates from the base.
Step 7
Screw Removal
- Remove the single screw beside headphone jack.
Remove the single screw beside headphone jack.
Step 8
Unfasten Clips and Cable Connectors
- Use tweezers to remove both antenna clips.
- Use a spudger to disconnect six cable connectors.
Use tweezers to remove both antenna clips.
Use a spudger to disconnect six cable connectors.
Step 9
Motherboard Removal
- Pull up on the motherboard with tweezers.
Pull up on the motherboard with tweezers.
Step 10
Unclipping the Camera
- Unclip the camera connecting cable using the plastic opening tool from the motherboard
- Remove loose camera from base
Unclip the camera connecting cable using the plastic opening tool from the motherboard
Remove loose camera from base
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
37 other people completed this guide.
Author
with 4 other contributors
Brittany Gail
Member since: 09/23/2014
8,463 Reputation
8 Guides authored
Badges:
19
+16 more badges
Team
USF Tampa, Team 2-2, Blackwell Fall 2014
Member of USF Tampa, Team 2-2, Blackwell Fall 2014
USFT-BLACKWELL-F14S2G2
4 Members
25 Guides authored
Chris G - Jun 6, 2017
Reply
Awesome, phone disassembly and fingernail painting at same time :) Thanks for your time to post this!
hameidfehri - Jan 5, 2018
Reply
Hi
Thanks for the nice instructions
Do you know if I can use a Note 4 camera (or any better!) for my Note 3?
Are they different in connections?
Thanks
Malik wajdan ali - Jul 8, 2022
Reply
I shall be very thankfull for this act of kindness