Difficulty

Moderate

Steps

9

Time Required

                          40 minutes

Sections

1

  • Display Assembly
  • 9 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSamsung Galaxy Note Edge

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Video manual

What you need

Video Overview

Step 1

              Remove the Galaxy Note Edge Battery
  • Switch off the device.
  • Remove the back cover and the battery.

Switch off the device.

Remove the back cover and the battery.

1024

Step 2

              Remove the Galaxy Note Edge Rear Housing
  • Remove the Memory card, the SIM card and the S Pen.
  • Remove the screws by using Screwdriver Phillips #00
  • With a plastic opening tool emove the Back Frame.

Remove the Memory card, the SIM card and the S Pen.

Remove the screws by using Screwdriver Phillips #00

With a plastic opening tool emove the Back Frame.

Step 3

              Remove the Galaxy Note Edge Motherboard 1
  • Disconnect one by one:
  • Coaxial antenna cable (x2)
  • Home Button flex cable
  • Display Flex cable
  • Stylus Sensor flex cable
  • Front Camera flex cable

Disconnect one by one:

Coaxial antenna cable (x2)

Home Button flex cable

Display Flex cable

Stylus Sensor flex cable

Front Camera flex cable

Step 4

              Remove the Galaxy Note Edge Motherboard 2
  • Pry up the connector on the back of the board to release the bottom part of motherboard.
  • Gently remove the logic board.

Pry up the connector on the back of the board to release the bottom part of motherboard.

Gently remove the logic board.

Step 5

              Test the new spare part
  • I prefer to test the new spare part before install it.
  • Transfer the Power button / Loud speaker flex cable.
  • Install the mother board.
  • Test the display.
  • To prevent damage to the put back the back frame before the test.

I prefer to test the new spare part before install it.

Transfer the Power button / Loud speaker flex cable.

Install the mother board.

Test the display.

To prevent damage to the put back the back frame before the test.

Step 6

              Check the Thermal Pads
  • Check the quality of the thermal pads (if the spare part is not original).
  • If its necessary use the thermal pads from the old assembly.

Check the quality of the thermal pads (if the spare part is not original).

If its necessary use the thermal pads from the old assembly.

Step 7

              Transfer all the parts from the old Display assembly - Part 1
  • Insert wisdom here.

Insert wisdom here.

Step 8

              Remove the Galaxy Note Edge Charging Port Flex Assembly.
  • Remove the black Phillips screw,
  • the the charging port plate,
  • disconnect the Home buttons flex cable
  • and the coaxial antenna cable (x2).
  • Use hot air and a plastic opening tool to remove the Charging Port flex assembly.

Remove the black Phillips screw,

the the charging port plate,

disconnect the Home buttons flex cable

and the coaxial antenna cable (x2).

Use hot air and a plastic opening tool to remove the Charging Port flex assembly.

Step 9

              Reassembling
  • To reassemble your device, follow these instructions in reverse order.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    ZFix

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored