Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
2
- Rear Case
- 2 steps
- MicroSD Card
- 1 step
Flags
0
BackSamsung Galaxy Note II
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Pry with a plastic opening tool, or your fingernail, in the divot to the left of the rear-facing camera, near the power button.
Pry with a plastic opening tool, or your fingernail, in the divot to the left of the rear-facing camera, near the power button.
1024
Step 2
- Lift the rear case by the corner nearest the divot and remove it from the phone.
Lift the rear case by the corner nearest the divot and remove it from the phone.
Step 3
MicroSD Card
- If you have an SD card inserted, use the flat end of a spudger, or your fingernail, to press the microSD card slightly deeper into its slot until you hear a click.
- After the click, release the card and it will pop out of its slot.
- Remove the microSD card.
- For reassembly, push the microSD card into the slot until it clicks in place.
If you have an SD card inserted, use the flat end of a spudger, or your fingernail, to press the microSD card slightly deeper into its slot until you hear a click.
After the click, release the card and it will pop out of its slot.
Remove the microSD card.
For reassembly, push the microSD card into the slot until it clicks in place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
15 other people completed this guide.
Author
with 2 other contributors
Sam Goldheart
Member since: 10/18/2012
455,549 Reputation
548 Guides authored
Badges:
48
+45 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,767 Guides authored