Difficulty
Moderate
Steps
12
Time Required
Suggest a time??
Sections
5
- Rear Case
- 2 steps
- Battery
- 1 step
- MicroSD Card
- 2 steps
- SIM Card
- 2 steps
- Midframe
- 5 steps
Flags
0
BackSamsung Galaxy Note
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Pry with a plastic opening tool, or your fingernail, in the divot to the right of the rear-facing camera, near the volume rocker.
Pry with a plastic opening tool, or your fingernail, in the divot to the right of the rear-facing camera, near the volume rocker.
1024
Step 2
- Lift and remove the rear case from the phone.
Lift and remove the rear case from the phone.
Step 3
Battery
- Insert your finger in the notch of the battery compartment.
- Press the battery toward the rear facing camera while pulling outward.
Insert your finger in the notch of the battery compartment.
Press the battery toward the rear facing camera while pulling outward.
Step 4
MicroSD Card
- Use the flat end of a spudger, or your fingernail, to press the microSD card slightly deeper into its slot until you hear a click.
- After the click, release the card and it will pop out of its slot.
- For reassembly, push the microSD card into the slot until it clicks in place.
Use the flat end of a spudger, or your fingernail, to press the microSD card slightly deeper into its slot until you hear a click.
After the click, release the card and it will pop out of its slot.
For reassembly, push the microSD card into the slot until it clicks in place.
Step 5
- Remove the microSD card from its slot in the midframe.
Remove the microSD card from its slot in the midframe.
Step 6
SIM Card
- Use a plastic opening tool, or your fingernail, to push the SIM card out of its compartment.
Use a plastic opening tool, or your fingernail, to push the SIM card out of its compartment.
Step 7
- Slide the SIM card out the rest of the way with your thumb and remove it from the device.
Slide the SIM card out the rest of the way with your thumb and remove it from the device.
Step 8
Midframe
- Remove the nine 3.4 mm Phillips #00 screws securing the midframe to the display assembly.
Remove the nine 3.4 mm Phillips #00 screws securing the midframe to the display assembly.
Step 9
- Insert your plastic opening tool to the left of the power button between the midframe and the front panel assembly and pry.
Insert your plastic opening tool to the left of the power button between the midframe and the front panel assembly and pry.
Step 10
- Slide the plastic opening tool down the seam.
Slide the plastic opening tool down the seam.
Step 11
- Insert your plastic opening tool to the left of the headphone jack between the midframe and the display assembly.
- Slide the opening tool along the top edge of the phone.
- Continue to run the plastic opening tool around the perimeter of the phone until the midframe is separated.
Insert your plastic opening tool to the left of the headphone jack between the midframe and the display assembly.
Slide the opening tool along the top edge of the phone.
Continue to run the plastic opening tool around the perimeter of the phone until the midframe is separated.
Step 12
- Remove the midframe from the display assembly.
Remove the midframe from the display assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
16 other people completed this guide.
Author
with 1 other contributor
Sam Goldheart
Member since: 10/18/2012
455,549 Reputation
548 Guides authored
Badges:
48
+45 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,767 Guides authored
