Difficulty
Moderate
Steps
6
Time Required
15 minutes
Sections
1
- USB Port
- 6 steps
Flags
0
BackSamsung Galaxy Note Pro 12.2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
USB Port
- Make sure the device is off before starting your repair.
- Carefully remove the back cover with the plastic opening tool.
- It is best to start with one corner and work your way around the device slowly.
Make sure the device is off before starting your repair.
Carefully remove the back cover with the plastic opening tool.
It is best to start with one corner and work your way around the device slowly.
1024
Step 2
- Using your finger, push up on the clip to disconnect from the device.
Using your finger, push up on the clip to disconnect from the device.
Step 3
- Remove the two 3mm screws from the silver cover using the Phillips #00 screwdriver.
Remove the two 3mm screws from the silver cover using the Phillips #00 screwdriver.
Step 4
- Pop open the orange tab that is connected to the SD port using the plastic opening tool.
Pop open the orange tab that is connected to the SD port using the plastic opening tool.
Step 5
- Pop up the USB port with the plastic opening tool.
- Make sure that you are pushing up from underneath the part and not placing the tool inside the USB port itself.
Pop up the USB port with the plastic opening tool.
Make sure that you are pushing up from underneath the part and not placing the tool inside the USB port itself.
Step 6
- Using the plastic opening tool, carefully lift away the orange piece connected to the USB port.
- This piece is glued down. Be careful as you peel it away from the device.
Using the plastic opening tool, carefully lift away the orange piece connected to the USB port.
This piece is glued down. Be careful as you peel it away from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 3 other contributors
Tina Kong
Member since: 09/22/2017
1,254 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
Central Washington University, Team S1-G4, Pengilly Fall 2017
Member of Central Washington University, Team S1-G4, Pengilly Fall 2017
CWU-PENGILLY-F17S1G4
4 Members
10 Guides authored
Wayne De Groot - Jan 10, 2018
Reply
I have a problem with my note pro 12.2 wifi. The battery connector is broken and needs to be replaced on the motherboard. I want to do it right but can find No information online about removing the motherboard (I have found one that is very good for the 10.1) but there are cables on the 12.2 not on the 10.1 that I am not sure how to remove them.
How about a battery connector replacement for the note pro 12.2 SM-P900 on motherboard.
Carol Lapp - May 19, 2018
Reply
Great instruction set and photos. I was a little nervous cracking it open for the first time (not as bad as the first time I upgraded my PC, but close), but your pictures and instructions were aces! It would have gone easier if I’d realized earlier that clicking on the photos popped them out to a separate tab where I could zoom, but I figured that out soon enough. The general concensus on the opener tools are that they don’t last long. I’d have to agree with that. Mine took a beating trying to get the back off, but with your instructions, it’s fixed. Thanks!
Russell Ichenberg - Nov 2, 2018
Reply
I lost the two screws. What size are they and where can I purchase them? Thank you.
Daniela Chrzanowski - Sep 18, 2020
Reply
very good instructions, was very helpful.
But it’s still makes trouble charging.
Can it be any other problem or reason? Something doing the opposite of loading, very frustrating.