Samsung Galaxy Prevail 2 Rear Facing Camera Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          8 - 10 minutes            

Sections

2

• Battery
• 2 steps
• Rear Facing Camera
• 6 steps

Flags

0

• BackSamsung Galaxy Prevail 2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Removing Back Casing               

• Using your finger nails or the spudger; pry the plastic casing open, and pull away from the body of the phone.

Using your finger nails or the spudger; pry the plastic casing open, and pull away from the body of the phone.

1024

Step 2

              Remove Battery               

• Gently pull the battery out of the phone.

Gently pull the battery out of the phone.

Step 3

              Remove Screws               

• Unscrew all of the screws.
• Be sure to set the screws aside in a safe place.

Unscrew all of the screws.

Be sure to set the screws aside in a safe place.

Step 4

              Pry Off Back Of Phone               

• Insert the plastic prying tool between the silver frame and the white face of the phone to pry off the front frame.
• Make sure to pry around the entire frame before attempting to loosen it.
• Push the motherboard out using your thumbs as shown

Insert the plastic prying tool between the silver frame and the white face of the phone to pry off the front frame.

Make sure to pry around the entire frame before attempting to loosen it.

Push the motherboard out using your thumbs as shown

Step 5

              Open Up The Motherboard               

• Lift the flap up using the plastic prying tool.

Lift the flap up using the plastic prying tool.

Step 6

              Detach Motherboard               

• Lift the second flap to detach the motherboard completely.

Lift the second flap to detach the motherboard completely.

Step 7

              Locate Camera               

• With plastic prying tool, lift the flap connected to the camera (indicated in red) to remove it.
• Be sure that you are looking at the back face of the motherboard.

With plastic prying tool, lift the flap connected to the camera (indicated in red) to remove it.

Be sure that you are looking at the back face of the motherboard.

Step 8

              Detach Camera               

• Carefully lift and remove the camera from its position.

Carefully lift and remove the camera from its position.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Alexandra Hernandez                     

Member since: 10/08/2014

741 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       USF Tampa, Team 14-4, Leahy Fall 2014                        

                                                  Member of USF Tampa, Team 14-4, Leahy Fall 2014 



                    USFT-LEAHY-F14S14G4                     


                                            4 Members                     


                                            5 Guides authored