Samsung Galaxy Prevail Headphone Jack Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 - 25 minutes            

Sections

1

• Headphone Jack
• 6 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackSamsung Galaxy Prevail

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Headphone Jack               

• Using your hands, carefully remove the back panel by popping the open slit, near the headphone jack, outwards.

Using your hands, carefully remove the back panel by popping the open slit, near the headphone jack, outwards.

1024

Step 2

• Using your fingernail or nylon spudger, remove the battery by lifting upward in the recess of the bottom right corner.

Using your fingernail or nylon spudger, remove the battery by lifting upward in the recess of the bottom right corner.

Step 3

• Remove the (6) 4mm screws using a Phillips #00 screwdriver.

Remove the (6) 4mm screws using a Phillips #00 screwdriver.

Step 4

• Using the nylon spudger, carefully unhinge and pry the secondary rear panel using the recessed tabs on the left and right sides.
• The secondary rear panel houses the camera lens and speaker assembly,
• The metal trim of the headphone jack may come loose during this process.

Using the nylon spudger, carefully unhinge and pry the secondary rear panel using the recessed tabs on the left and right sides.

The secondary rear panel houses the camera lens and speaker assembly,

The metal trim of the headphone jack may come loose during this process.

Step 5

• Using the spudger lift the speaker assembly upward, so you may have access to the headphone assembly.
• Battery is connected to the motherboard with adhesive backing so use some force when removing the speaker assembly.

Using the spudger lift the speaker assembly upward, so you may have access to the headphone assembly.

Battery is connected to the motherboard with adhesive backing so use some force when removing the speaker assembly.

Step 6

• Using the spudger, carefully unplug and remove the headphone port assembly by lifting upward on the ribbon cable.
• The headphone jack should lift off of the motherboard.

Using the spudger, carefully unplug and remove the headphone port assembly by lifting upward on the ribbon cable.

The headphone jack should lift off of the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Ricardo Zuloaga                     

Member since: 09/15/2016

525 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team 17-6, Blackwell Fall 2016                        

                                                  Member of USF Tampa, Team 17-6, Blackwell Fall 2016 



                    USFT-BLACKWELL-F16S17G6                     


                                            3 Members                     


                                            5 Guides authored