Samsung Galaxy Prevail Touch Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 30 minutes

Sections

Touch Screen
7 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

BackSamsung Galaxy Prevail
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Touch Screen

Using your hands, carefully remove the back panel by popping the open slit, near the headphone jack, outwards.

Using your hands, carefully remove the back panel by popping the open slit, near the headphone jack, outwards.

1024

Step 2

Using your fingernail or nylon spudger, remove the battery by lifting upward in the recess of the bottom right corner.

Using your fingernail or nylon spudger, remove the battery by lifting upward in the recess of the bottom right corner.

Step 3

Remove the (6) 4mm screws using a Phillips #00 screwdriver.

Remove the (6) 4mm screws using a Phillips #00 screwdriver.

Step 4

Using the black spudger, carefully unhinge and pry the secondary rear panel , which houses the camera lens and speaker.
The metal trim of the headphone jack may come loose during this process.

Using the black spudger, carefully unhinge and pry the secondary rear panel , which houses the camera lens and speaker.

The metal trim of the headphone jack may come loose during this process.

Step 5

Using the spudger, gently pry upward on the motherboard by the right side.
Motherboard is connected to shield plate with ribbon cable.

Using the spudger, gently pry upward on the motherboard by the right side.

Motherboard is connected to shield plate with ribbon cable.

Step 6

Using a spudger, carefully unhinge the gray shield plate by lifting upwards on the right side.
The shield plate will not be fully removed, it is attached to the front panel with a ribbon cable.

Using a spudger, carefully unhinge the gray shield plate by lifting upwards on the right side.

The shield plate will not be fully removed, it is attached to the front panel with a ribbon cable.

Step 7

Using the spudger lift up the LCD screen and replace with the new screen.

Using the spudger lift up the LCD screen and replace with the new screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors

                    Ricardo Zuloaga

Member since: 09/15/2016

525 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 17-6, Blackwell Fall 2016                        

                                                  Member of USF Tampa, Team 17-6, Blackwell Fall 2016 



                    USFT-BLACKWELL-F16S17G6                     


                                            3 Members                     


                                            5 Guides authored

Slice and Dice#

Introduction#

What you need#

Team#

Slice and Dice

Introduction

What you need

Team