Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

3

  • Rear Case
  • 1 step
  • Battery
  • 1 step
  • Speaker Assembly
  • 4 steps

Flags

0

  • BackSamsung Galaxy R

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case               
  • Insert your fingernail or a plastic tool into the opening near the headphone jack on top of the phone.
  • Gently pry apart the rear case from the midframe and remove.

Insert your fingernail or a plastic tool into the opening near the headphone jack on top of the phone.

Gently pry apart the rear case from the midframe and remove.

1024

Step 2

              Battery               
  • Insert your fingernail, or a plastic tool, into the crevice on the lower left side of the back side.
  • Gently pry the battery from the back of the phone.

Insert your fingernail, or a plastic tool, into the crevice on the lower left side of the back side.

Gently pry the battery from the back of the phone.

Step 3

              Remove screws               
  • With the Phillips head screwdriver, remove all seven 4.0 mm screws, highlighted in red, from the rear case.
  • Insert your finger or an opening tool underneath the midframe and gently pry apart from the phone.

With the Phillips head screwdriver, remove all seven 4.0 mm screws, highlighted in red, from the rear case.

Insert your finger or an opening tool underneath the midframe and gently pry apart from the phone.

Step 4

              Bottom Panel               
  • Insert an opening tool underneath the bottom panel near the bottom left side of the back of the phone.
  • Gently pry the part of the motherboard that is pointed out in the picture to the left from underneath the part of the phone that it is latched under.
  • Gently lift the bottom panel from the back of the phone.

Insert an opening tool underneath the bottom panel near the bottom left side of the back of the phone.

Gently pry the part of the motherboard that is pointed out in the picture to the left from underneath the part of the phone that it is latched under.

Gently lift the bottom panel from the back of the phone.

Step 5

              Top Panel               
  • Use tweezers to grasp the vibrator piece firmly and pull it away from the top panel with enough force to break the glue bond.
  • Insert an opening tool underneath the top panel near the top left side of the back of the phone.
  • Gently lift the panel from the back of the phone.

Use tweezers to grasp the vibrator piece firmly and pull it away from the top panel with enough force to break the glue bond.

Insert an opening tool underneath the top panel near the top left side of the back of the phone.

Gently lift the panel from the back of the phone.

Step 6

              Speaker               
  • The speaker is located near the top of the phone underneath the motherboard circled in red.
  • To remove the speaker, gently pull on the strap attached until it releases from the phone.

The speaker is located near the top of the phone underneath the motherboard circled in red.

To remove the speaker, gently pull on the strap attached until it releases from the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Daniel Hawkins                     

Member since: 10/13/2014

328 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Clemson, Team 3-3, Benson Fall 2014                        

                                                  Member of Clemson, Team 3-3, Benson Fall 2014 



                    CLEM-BENSON-F14S3G3                     


                                            5 Members                     


                                            8 Guides authored