Samsung Galaxy S Blaze Display Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

• Power Button
• 4 steps
• Display Assembly
• 1 step

Flags

3

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSamsung Galaxy S Blaze

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Power Button               

• Start by removing the back plastic cover by lifting it up from the notch on the left side of the phone

Start by removing the back plastic cover by lifting it up from the notch on the left side of the phone

1024

Step 2

• Remove the battery and use a small Phillips head screwdriver to remove the marked up screws

Remove the battery and use a small Phillips head screwdriver to remove the marked up screws

Step 3

• Use a flat tool to pry the two plastic cases apart
• The latches are very strong, so don’t be afraid to use force

Use a flat tool to pry the two plastic cases apart

The latches are very strong, so don’t be afraid to use force

Step 4

• Locate the missing button slot
• Place in replacement button, and close the plastic housing around it
• The button should be fully functional now, repeat past steps to reassemble the phone

Locate the missing button slot

Place in replacement button, and close the plastic housing around it

The button should be fully functional now, repeat past steps to reassemble the phone

Step 5

              Display Assembly               

• Gently remove the two ribbon cables as shown.
• Connect the new screen to the main motherboard just as the same way they were connected.
• Be careful not to crimp or bend the ribbon cables, as this will ruin the replacement.
• Repeat the steps in reverse order to reassemble the phone.

Gently remove the two ribbon cables as shown.

Connect the new screen to the main motherboard just as the same way they were connected.

Be careful not to crimp or bend the ribbon cables, as this will ruin the replacement.

Repeat the steps in reverse order to reassemble the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Dustin                     

Member since: 03/12/2014

1,090 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       University of Maryland, Team 6-2, Vijaybhaskar Spring 2014                        

                                                  Member of University of Maryland, Team 6-2, Vijaybhaskar Spring 2014 



                    UMD-VIJAYBHASKAR-S14S6G2                     


                                            4 Members                     


                                            14 Guides authored