Samsung Galaxy S Ii T989 Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Rear Cover
1 step
Inner Plate
2 steps
Speaker
1 step

Flags

BackSamsung Galaxy S II T989
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Rear Cover

To remove the rear cover, locate the tab indicated by the red outline.
Using your fingernail, gently pry the rear cover.

To remove the rear cover, locate the tab indicated by the red outline.

Using your fingernail, gently pry the rear cover.

1024

Step 2

              Inner Plate

The inner plate is held on by six screws that are 1/16 of an inch (1.6 mm).
Remove the screws with a Philips head precision screwdriver.
Place all screws someplace that they will not easily be lost, such as a magnetic mat or a plastic bag.

The inner plate is held on by six screws that are 1/16 of an inch (1.6 mm).

Remove the screws with a Philips head precision screwdriver.

Place all screws someplace that they will not easily be lost, such as a magnetic mat or a plastic bag.

Step 3

When removing the inner plate, place device on grounded surface or use anti static wrist band.
After the screws have been removed, the only thing holding the inner plate in is several plastic tabs built into the frame of the phone.
Firmly pinch the edge, as shown in the picture, and pull the plate away from the frame.
If you cannot get a grip on the inner plate, consider using the spudger to pry and lift the plate out.

When removing the inner plate, place device on grounded surface or use anti static wrist band.

After the screws have been removed, the only thing holding the inner plate in is several plastic tabs built into the frame of the phone.

Firmly pinch the edge, as shown in the picture, and pull the plate away from the frame.

If you cannot get a grip on the inner plate, consider using the spudger to pry and lift the plate out.

Step 4

              Speaker

The speaker is located in the area located by the red rectangle.
To remove the speaker hold the frame with one hand then push the speaker out with the other.
It may take a large amount of force so be careful to hold the frame to prevent it from breaking.

The speaker is located in the area located by the red rectangle.

To remove the speaker hold the frame with one hand then push the speaker out with the other.

It may take a large amount of force so be careful to hold the frame to prevent it from breaking.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors

                    Joshua King

Member since: 03/26/2014

1,345 Reputation

                                      9 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Clemson, Team 1-5, Benson Spring 2014                        

                                                  Member of Clemson, Team 1-5, Benson Spring 2014 



                    CLEM-BENSON-S14S1G5                     


                                            4 Members                     


                                            9 Guides authored

betty - Jul 10, 2015

and one would purchase a speaker where?????? :-)

thanialorena - Jul 25, 2015

http://www.ebay.com/itm/OEM-Samsung-Gala…

Muhammad azan - May 26, 2016

speaker jumper ways

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team