Samsung Galaxy S Plus Front Panel Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          15 minutes            

Sections

1

• Front Panel Assembly
• 6 steps

Flags

3

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

Missed a Step

Oops! This guide is currently missing some important steps.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackSamsung Galaxy S Plus

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Panel Assembly               

• Unscrew 7 screws on the rear using a Phillips screw driver.

Unscrew 7 screws on the rear using a Phillips screw driver.

1024

Step 2

• Unhook the rear using a soft plastic prying tool to remove the rear cover
• Be careful not to damage the rear cover when unhooking it.

Unhook the rear using a soft plastic prying tool to remove the rear cover

Be careful not to damage the rear cover when unhooking it.

Step 3

• Detach the Power Key FPCB, that is stick to the bracket by a double-sided tape, using tweezers. Make sure to remove all remaining tape on the bracket.

Detach the Power Key FPCB, that is stick to the bracket by a double-sided tape, using tweezers. Make sure to remove all remaining tape on the bracket.

Step 4

• Disconnect LCD Connector,Receiver Connector, Sub-touch Key Connector and Antenna cable from the Main PBA
• Disconnecting the camera connector isn’t necessary!

Disconnect LCD Connector,Receiver Connector, Sub-touch Key Connector and Antenna cable from the Main PBA

Disconnecting the camera connector isn’t necessary!

Step 5

• After disconnecting the connectors carefully pull the Main PBA out of the bracket.
• Make sure that the Power Key FPCB does not get stuck!

After disconnecting the connectors carefully pull the Main PBA out of the bracket.

Make sure that the Power Key FPCB does not get stuck!

Step 6

• Remove the antenna cable from the main Antenna PCB on the sub-touch key module of your broken Screen Digitizer Frame
• Pull out the Receiver module from the bracket. Be careful not to damage the FPC.
• Now assembly both Receiver module and antenna cable into the new Screen Digitizer Frame and reverse the process of disassembly!

Remove the antenna cable from the main Antenna PCB on the sub-touch key module of your broken Screen Digitizer Frame

Pull out the Receiver module from the bracket. Be careful not to damage the FPC.

Now assembly both Receiver module and antenna cable into the new Screen Digitizer Frame and reverse the process of disassembly!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      13 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Joao de Matos                     

Member since: 07/02/2013

362 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges