Difficulty
Moderate
Steps
2
Time Required
10 - 20 minutes
Sections
1
- Rear Camera Lens
- 2 steps
Flags
0
BackSamsung Galaxy S7 Edge
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Removing the lens while the phone is still assembled may cause small pieces of glass to fall into the camera, but is a faster fix that requires less disassembly.
The lens assembly replacement is longer, and requires removing the back panel, but it is less likely to damage the camera itself. This procedure includes replacing the glass lens and the camera bezel, and will require replacement rear glass adhesive.
What you need
Step 1
Glass-Only Replacement
- Follow this procedure if you are replacing only the glass lens over the rear-facing camera.
- If you are replacing the entire bezel, skip this step and follow the instructions in the next step.
Follow this procedure if you are replacing only the glass lens over the rear-facing camera.
If you are replacing the entire bezel, skip this step and follow the instructions in the next step.
1024
Step 2
Bezel and Camera Lens Replacement
- Follow this longer procedure to replace the bezel and camera lens, which are installed on the rear case.
- If you follow this procedure, you will need new adhesive to reinstall the rear case. Follow this guide to reinstall the camera bezel adhesive as well as the rear cover adhesive.
Follow this longer procedure to replace the bezel and camera lens, which are installed on the rear case.
If you follow this procedure, you will need new adhesive to reinstall the rear case. Follow this guide to reinstall the camera bezel adhesive as well as the rear cover adhesive.
Cancel: I did not complete this guide.
16 other people completed this guide.
Author
Evan Noronha
Member since: 02/05/2015
218,062 Reputation
177 Guides authored
Badges:
49
+46 more badges