Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes

Sections

2

  • Rear Circuit Board
  • 5 steps
  • Rear Camera
  • 1 step

Flags

0

  • BackSamsung Galaxy SIII Mini VE

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removing Rear Casing
  • Flip your phone so you are facing the back.
  • Locate the notch at the top and gently use your finger or an opening tool to remove the rear casing.

Flip your phone so you are facing the back.

Locate the notch at the top and gently use your finger or an opening tool to remove the rear casing.

1024

Step 2

              Removing Battery
  • Use your finger or an opening tool to pry the battery out of the phone.

Use your finger or an opening tool to pry the battery out of the phone.

Step 3

              Removing Screws
  • Use the Phillips #000 Screwdriver to remove the 10, 4mm screws holding the plastic frame in place.

Use the Phillips #000 Screwdriver to remove the 10, 4mm screws holding the plastic frame in place.

Step 4

  • Using an opening tool, gently separate the plastic framing from the phone.

Using an opening tool, gently separate the plastic framing from the phone.

Step 5

              Removing Circuit Board
  • Unhook the two electrical connections at the bottom of the phone using your fingernail or a spudger.
  • Next, use the spudger and tweezers to remove the speaker at the top of the phone.
  • Once the 3 components have detached, the circuit board should release from the phone except for 1 connection on the underside.
  • Detach this connection using the spudger.

Unhook the two electrical connections at the bottom of the phone using your fingernail or a spudger.

Next, use the spudger and tweezers to remove the speaker at the top of the phone.

Once the 3 components have detached, the circuit board should release from the phone except for 1 connection on the underside.

Detach this connection using the spudger.

Step 6

              Removing Camera
  • Flip the holding tab to the open position.
  • Gently, separate the rear camera and the motherboard.

Flip the holding tab to the open position.

Gently, separate the rear camera and the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Megan

Member since: 10/23/2014

1,186 Reputation

                                      6 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Michigan Tech, Team 1-8, Lauer Fall 2014                        

                                                  Member of Michigan Tech, Team 1-8, Lauer Fall 2014 



                    MTU-LAUER-F14S1G8                     


                                            3 Members                     


                                            6 Guides authored