Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

4

  • Battery Replacement
  • 2 steps
  • Screen
  • 3 steps
  • Motherboard
  • 1 step
  • Speaker
  • 1 step

Flags

0

  • BackSamsung Galaxy Star Pro

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery Replacement
  • Place phone firmly between both hands with one hand flat on the back of the phone and pop off the back cover

Place phone firmly between both hands with one hand flat on the back of the phone and pop off the back cover

1024

Step 2

  • Once rear cover is off use small pastic spudger to lift battery out of the phone

Once rear cover is off use small pastic spudger to lift battery out of the phone

Step 3

              Screen
  • After following how to remove the battery, unscrew the five 1.2mm Phillips Screws on the one back of the phone using screw driver. Use the J00 Phillips head screw bit to take out the screws

After following how to remove the battery, unscrew the five 1.2mm Phillips Screws on the one back of the phone using screw driver. Use the J00 Phillips head screw bit to take out the screws

Step 4

  • Once screws are removed turn the phone over and use the plastic opening tool and unclip the connector holding the screen to the motherboard.
  • Be careful to not damage the press-fit connector that connects the screen to the motherboard.

Once screws are removed turn the phone over and use the plastic opening tool and unclip the connector holding the screen to the motherboard.

Be careful to not damage the press-fit connector that connects the screen to the motherboard.

Step 5

  • Us the plastic opening tool to pry apart the screen from the plastic. Start from one side and work your way around the whole phone.

Us the plastic opening tool to pry apart the screen from the plastic. Start from one side and work your way around the whole phone.

Step 6

              Motherboard
  • Unscrew the 1.2mm Phillip screw that connects the motherboard to the rest of the phone. Then by using your thumbs pop the inners of the phone out. Also use same J00 Phillips head bit from prior steps.

Unscrew the 1.2mm Phillip screw that connects the motherboard to the rest of the phone. Then by using your thumbs pop the inners of the phone out. Also use same J00 Phillips head bit from prior steps.

Step 7

              Speaker
  • Use plastic tools to grab hold of one side of the speaker on the motherboard, and then gently lift. There is nothing holding the speakers, so it should come right off.

Use plastic tools to grab hold of one side of the speaker on the motherboard, and then gently lift. There is nothing holding the speakers, so it should come right off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 3 other contributors 


                    Kevin Teque

Member since: 03/10/2016

291 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team 7-2, Catania Spring 2016                        

                                                  Member of UMass Dartmouth, Team 7-2, Catania Spring 2016 



                    UMASSD-CATANIA-S16S7G2                     


                                            3 Members                     


                                            5 Guides authored

me good - Sep 7, 2017

Reply

how cost spaeaker component

mido shora - Dec 15, 2018

Reply

thanks Alot…….