Samsung Galaxy Tab 10 1 Rear Panel Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Rear Panel
3 steps

Flags

BackSamsung Galaxy Tab 10.1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Rear Panel

Place the bottom of the tablet towards you.
Remove the 4.1mm screws near the charge port with a Tri-Wing screwdriver.
If there are plastic tabs covering these screws, use pointed tweezers to pry the tabs out.
On model GT-P7500, this step is omitted, as that model doesn’t have these 2 screws.

Place the bottom of the tablet towards you.

Remove the 4.1mm screws near the charge port with a Tri-Wing screwdriver.

If there are plastic tabs covering these screws, use pointed tweezers to pry the tabs out.

On model GT-P7500, this step is omitted, as that model doesn’t have these 2 screws.

1024

Step 2

Start in the middle of the left side and insert a plastic opening tool between the rear panel and the front panel assembly.
Carefully run the plastic opening tool along the left and top edge to pry the rear panel away from the rest of the device.
Place opening picks along the side you have already pried open to keep the back panel detached from the rest of the device.
Be sure to work carefully, as prying too firmly can crack the screen.

Start in the middle of the left side and insert a plastic opening tool between the rear panel and the front panel assembly.

Carefully run the plastic opening tool along the left and top edge to pry the rear panel away from the rest of the device.

Place opening picks along the side you have already pried open to keep the back panel detached from the rest of the device.

Be sure to work carefully, as prying too firmly can crack the screen.

Step 3

Using the plastic opening tools, continue to carefully run along the right and bottom edge, and then lift the screen from the back panel.

Using the plastic opening tools, continue to carefully run along the right and bottom edge, and then lift the screen from the back panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      13 other people completed this guide.

Author

                                      with 11 other contributors

                    Davie Sy

Member since: 09/30/2013

1,421 Reputation

                                      4 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Cal Poly, Team 13-5, Forte Fall 2013                        

                                                  Member of Cal Poly, Team 13-5, Forte Fall 2013 



                    CPSU-FORTE-F13S13G5                     


                                            5 Members                     


                                            17 Guides authored

James Tobin - Jan 2, 2018

Very interesting, but my note 10.1 does not have these two screws adjacent to the charge point as you describe. So mine is a bit different. There are no screws anywhere on the tablet. So how do I take the back off mine ??

It currently won’t start and I have read about a fix that requires the back to be removed.

Brian Elling - Mar 21, 2018

What - How - Ware ? Yes I looked online for the parts, no I was not successful in finding the parts online. Can you tell me ware you found the parts for this project?

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team