Difficulty
Moderate
Steps
4
Time Required
20 minutes
Sections
2
- Rear Case
- 2 steps
- Front-Facing Camera
- 2 steps
Flags
0
BackSamsung Galaxy Tab 3 10.1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Rear Case
- Insert an opening pick between the rear case and the plastic rim.
- You may need to add multiple picks to detach the clips.
- Slide the pick along the edge of the rear case until you release the plastic clips attaching the rear case to the display.
- Continue to slide the pick around the edge of the rear case until all clips are released.
Insert an opening pick between the rear case and the plastic rim.
You may need to add multiple picks to detach the clips.
Slide the pick along the edge of the rear case until you release the plastic clips attaching the rear case to the display.
Continue to slide the pick around the edge of the rear case until all clips are released.
1024
Step 2
- Lift the case up to remove it.
Lift the case up to remove it.
Step 3
Front-Facing Camera
- Lift the plastic frame to remove.
- Avoid the three delicate ribbon cables.
Lift the plastic frame to remove.
Avoid the three delicate ribbon cables.
Step 4
- Use the flat end of a plastic spudger to pry up the press-fit connector from the motherboard.
- Remove the camera by gently pulling upward with a pair of tweezers.
Use the flat end of a plastic spudger to pry up the press-fit connector from the motherboard.
Remove the camera by gently pulling upward with a pair of tweezers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Corey Brown
Member since: 06/24/2016
8,011 Reputation
11 Guides authored
Badges:
33
+30 more badges