Samsung Galaxy Tab 3 10 1 Led Light Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

• Rear Case
• 2 steps
• LED Light
• 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSamsung Galaxy Tab 3 10.1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Rear Case               

• Insert an opening pick between the rear case and the plastic rim.
• You may need to add multiple picks to detach the clips.
• Slide the pick along the edge of the rear case until you release the plastic clips attaching the rear case to the display.
• Continue to slide the pick around the edge of the rear case until all clips are released.

Insert an opening pick between the rear case and the plastic rim.

You may need to add multiple picks to detach the clips.

Slide the pick along the edge of the rear case until you release the plastic clips attaching the rear case to the display.

Continue to slide the pick around the edge of the rear case until all clips are released.

1024

Step 2

• Lift the case up to remove it.

Lift the case up to remove it.

Step 3

              LED Light               

• Insert an opening pick between the plastic frame and the screen.
• Slide the opening pick around the perimeter of the screen.
• You will hear clicking noises as each plastic clip is released from the display chassis.

Insert an opening pick between the plastic frame and the screen.

Slide the opening pick around the perimeter of the screen.

You will hear clicking noises as each plastic clip is released from the display chassis.

Step 4

• Lift the plastic frame to remove.
• Avoid the three delicate ribbon cables.

Lift the plastic frame to remove.

Avoid the three delicate ribbon cables.

Step 5

• Use the flat end of the spudger to flip up the press-fit connector attaching the LED to the motherboard.
• Remove the LED indicator light by gently pulling upward with nylon-tipped tweezers.

Use the flat end of the spudger to flip up the press-fit connector attaching the LED to the motherboard.

Remove the LED indicator light by gently pulling upward with nylon-tipped tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Corey Brown                     

Member since: 06/24/2016

8,011 Reputation

                                      11 Guides authored                  



                       Badges:
                       33







                                                        +30 more badges                           

Ashwini Dughad - Feb 26, 2018

Reply

Above article is useful for removing LED Light.

Which LED are we removing - Camera Flash or screen display LED?

How to fit new LED Light?

Please reply. I am facing issues with screen display and flash for camera is also not working