Samsung Galaxy Tab 3 7 0 3G Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Back Cover and Frame
3 steps
Battery
1 step

Flags

BackSamsung Galaxy Tab 3 7.0 3G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Video Overview

Step 1

              White Backing

To begin working on your repair, turn your device over and open the micro SD slot, as shown in the first picture.
Using the flat part of the spudger, begin pushing it between the white backing and the SD slot. Continue to pry off the white backing until you hear several clicks and see the white backing lift up, as shown in the second picture.
Continue to pry off the white backing around the device, as shown in the third picture.

To begin working on your repair, turn your device over and open the micro SD slot, as shown in the first picture.

Using the flat part of the spudger, begin pushing it between the white backing and the SD slot. Continue to pry off the white backing until you hear several clicks and see the white backing lift up, as shown in the second picture.

Continue to pry off the white backing around the device, as shown in the third picture.

1024

Step 2

Once the backing has been pried off all around the device, remove the white backing.

Once the backing has been pried off all around the device, remove the white backing.

Step 3

              Silver Siding

To remove the silver siding, begin by pushing the spudger between the frame and the screen, as shown in the first picture.
Do this until you see the silver siding begin to lift up. Continue doing this around the edges of the device, as shown in the second picture.
Once you silver siding is loose all around the device, remove it carefully with your hand as shown in the third picture.

To remove the silver siding, begin by pushing the spudger between the frame and the screen, as shown in the first picture.

Do this until you see the silver siding begin to lift up. Continue doing this around the edges of the device, as shown in the second picture.

Once you silver siding is loose all around the device, remove it carefully with your hand as shown in the third picture.

Step 4

              Battery

Begin by removing the four designated 1.33x2.00 mm Phillips screws with the screwdriver, as shown in the first picture.
Once the screws are removed, use a pair of tweezers or the spudger to remove the battery connector.
Pull the battery connector up as shown in the second picture.
Once the battery connector is removed, you can remove the battery using the spudger as shown in the third picture.

Begin by removing the four designated 1.33x2.00 mm Phillips screws with the screwdriver, as shown in the first picture.

Once the screws are removed, use a pair of tweezers or the spudger to remove the battery connector.

Pull the battery connector up as shown in the second picture.

Once the battery connector is removed, you can remove the battery using the spudger as shown in the third picture.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 6 other contributors

                    Andrea Flores

Member since: 10/09/2014

1,516 Reputation

                                      6 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       Cal Poly, Team 14-30, Maness Fall 2014                        

                                                  Member of Cal Poly, Team 14-30, Maness Fall 2014 



                    CPSU-MANESS-F14S14G30                     


                                            4 Members                     


                                            18 Guides authored

mrbaker1917 - Jan 5, 2015

Thanks for this guide. It was really helpful. I did not need to remove the silver siding to replace the battery. Is this step optional?

Mark

Andrea Flores - Jan 10, 2015

I am glad this was useful mrbaker1917!! Yes, removing the silver sliding is optional but useful if you are trying to replace anything else on your tablet.

good medicine - Nov 24, 2015

Good job Andrea!

AT&T told us to buy a new tablet; couldn’t get batteries anymore. Usual no-nothing big box store employees selling on commission…….sheeesh!

You’re the hero today!

Rock

Introduction#

What you need#

Video Overview#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Video Overview

Team