Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Battery
- 4 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackSamsung Galaxy Tab 3 7.0
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Video Overview
Step 1
Battery
- With a plastic opening tool, gently insert the prying end in between the glass digitizer and the silver frame from the front of the device.
With a plastic opening tool, gently insert the prying end in between the glass digitizer and the silver frame from the front of the device.
1024
Step 2
- Working slowly and carefully, move around the entirety of the face of the device. Small plastic clips should release, if not, apply gentle outwards pressure until you hear the clips popping off.
Working slowly and carefully, move around the entirety of the face of the device. Small plastic clips should release, if not, apply gentle outwards pressure until you hear the clips popping off.
Step 3
- To begin actual removal of the battery itself, remove the four designated screws with your screwdriver.
- Once the screws are removed, use either the tip of your screwdriver or a pair of tweezers to pull up the battery connector. Pull directly up and the connector should pop out.
- Once the battery is removed, it should look as it does in the third picture.
To begin actual removal of the battery itself, remove the four designated screws with your screwdriver.
Once the screws are removed, use either the tip of your screwdriver or a pair of tweezers to pull up the battery connector. Pull directly up and the connector should pop out.
Once the battery is removed, it should look as it does in the third picture.
Step 4
- To finish battery replacement, place your new battery where the old battery was in your device, as shown in the picture.
To finish battery replacement, place your new battery where the old battery was in your device, as shown in the picture.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
57 other people completed this guide.
Author
with 7 other contributors
Ian Leonard
Member since: 04/22/2014
467 Reputation
1 Guide authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 7-20, Regan Spring 2014
Member of Cal Poly, Team 7-20, Regan Spring 2014
CPSU-REGAN-S14S7G20
4 Members
10 Guides authored
cpessaro - Feb 28, 2016
Reply
Don’t forget to reset the time and date when your done.
Some of the apps will not work and the operating system will not tell you that this is the problem.
Alburt Einstine - Oct 3, 2016
Reply
good job for making this as least complicated as possible i completed the guide
Bruce Wiggins - Jun 21, 2017
Reply
Great guide….. If you don’t have the plastic tool, my thumb nail worked just fine
Tkappock - Feb 17, 2018
Reply
Thanks for this great guide.
When attaching the new battery it helped me to actually attach the wiring connector before final placement of the battery. Also, I found it easier to put the single screw in first before pushing the battery all the way down and starting the three on the other side. The cscrew holes in the replacement battery have to be PERFECT and if they’re just slightly off you can’t get the one lonely screw started if you put the other three in first.
John Tahos - Jun 14, 2019
Reply
I enjoied the guide it was realy easy the video was varry helpfull. I do have a question is there any way to test the batery to make sure that is realy the problem, before i go replaycing it?
