Samsung Galaxy Tab 3 8 0 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          5 - 10 minutes            

Sections

1

• Battery
• 4 steps

Flags

0

• BackSamsung Galaxy Tab 3 8.0

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Caution must be exercised with the removal of any parts in order to avoid damage to the device.

What you need

Step 1

              Battery - Open up the tablet               

• Start out by separating the screen from the back cover using the larger plastic opening tool to pry them apart.
• Be careful when removing the screen as negligence can cause damage.

Start out by separating the screen from the back cover using the larger plastic opening tool to pry them apart.

Be careful when removing the screen as negligence can cause damage.

1024

Step 2

              Remove Back Cover               

• Once every part of the screen is separated from the back cover, you should be able to fully remove it with your hands.

Once every part of the screen is separated from the back cover, you should be able to fully remove it with your hands.

Step 3

              Disconnect Battery               

• To remove the battery you must use something small, such as tweezers, to disconnect the battery from its port.
• Note: the connection lifts up to remove.

To remove the battery you must use something small, such as tweezers, to disconnect the battery from its port.

Note: the connection lifts up to remove.

Step 4

              Remove Battery               

• After the battery is disconnected, use the pulling tab to safely remove the battery.

After the battery is disconnected, use the pulling tab to safely remove the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      31 other people completed this guide.                                             

Author

                                      with 10 other contributors 

                    Peter Paoletta                     

Member since: 09/22/2014

2,082 Reputation

                                      3 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges                           

Team

                       USF Tampa, Team 4-2, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 4-2, Brown Fall 2014 



                    USFT-BROWN-F14S4G2                     


                                            3 Members                     


                                            26 Guides authored                     

Hector McGillivray - Nov 27, 2016

Reply

To remove the battery without risk of damage, slide the corner of an old credit card under the battery in the middle at the end opposite the connector, then slide the card down under the battery to seperate the battery from the adhesive underneath. Repeat on the other side.

Lori Beth Kerns - Jun 2, 2020

Reply

Also be REALLY careful when lifting up on the battery connector. It can tear away from the motherboard easily.