Difficulty
Easy
Steps
2
Time Required
5 - 9 minutes
Sections
1
- Rear Case
- 2 steps
Flags
0
BackSamsung Galaxy Tab 3 Lite
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Using a plastic opening tool, wedge in the seam between the screen and the case.
- Rock the tool by moving it towards and away from the middle of the screen, trying to separate the tape holding the screen and case together.
- This is a long process, so don’t try and rush it. Also, be careful about applying pressure.
Using a plastic opening tool, wedge in the seam between the screen and the case.
Rock the tool by moving it towards and away from the middle of the screen, trying to separate the tape holding the screen and case together.
This is a long process, so don’t try and rush it. Also, be careful about applying pressure.
1024
Step 2
- After separating the tape holding the screen and case together, slowly start taking the screen off the case from the opposite side of the side with the buttons
After separating the tape holding the screen and case together, slowly start taking the screen off the case from the opposite side of the side with the buttons
To reassemble your device, snap the screen into the case.
Cancel: I did not complete this guide.
11 other people completed this guide.
Author
with 4 other contributors
Kevin Hicks
Member since: 02/09/2016
1,530 Reputation
2 Guides authored
Badges:
18
+15 more badges
Team
USF Tampa, Team 11-1, Cheng Spring 2016
Member of USF Tampa, Team 11-1, Cheng Spring 2016
USFT-CHENG-S16S11G1
4 Members
12 Guides authored