Samsung Galaxy Tab 3 Lite Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          5 minutes            

Sections

2

• Rear Case
• 2 steps
• Speaker
• 2 steps

Flags

0

• BackSamsung Galaxy Tab 3 Lite

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Case               

• Using a plastic opening tool, wedge in the seam between the screen and the case.
• Rock the tool by moving it towards and away from the middle of the screen, trying to separate the tape holding the screen and case together.
• This is a long process, so don’t try and rush it. Also, be careful about applying pressure.

Using a plastic opening tool, wedge in the seam between the screen and the case.

Rock the tool by moving it towards and away from the middle of the screen, trying to separate the tape holding the screen and case together.

This is a long process, so don’t try and rush it. Also, be careful about applying pressure.

1024

Step 2

• After separating the tape holding the screen and case together, slowly start taking the screen off the case from the opposite side of the side with the buttons

After separating the tape holding the screen and case together, slowly start taking the screen off the case from the opposite side of the side with the buttons

Step 3

              Speaker               

• Use one of the plastic opening tools and place it somewhat firmly on one of the two openings in the plastic around the speaker.
• Apply pressure and pry the speaker out of its seat. The speaker should just pop out.

Use one of the plastic opening tools and place it somewhat firmly on one of the two openings in the plastic around the speaker.

Apply pressure and pry the speaker out of its seat. The speaker should just pop out.

Step 4

• Using a spudger, carefully pry up the speaker ribbon cable.

Using a spudger, carefully pry up the speaker ribbon cable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Patricia Laird                     

Member since: 02/09/2016

906 Reputation

                                      4 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges                           

Team

                       USF Tampa, Team 11-1, Cheng Spring 2016                        

                                                  Member of USF Tampa, Team 11-1, Cheng Spring 2016 



                    USFT-CHENG-S16S11G1                     


                                            4 Members                     


                                            12 Guides authored