Difficulty
Moderate
Steps
6
Time Required
20 minutes
Sections
2
- Rear Case
- 3 steps
- Front Facing Camera
- 3 steps
Flags
0
BackSamsung Galaxy Tab 4 8.0 Verizon
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Before disassembling your Samsung Galaxy Tab 4 8.0, be sure it is powered off and you remove the SIM and Micro SD cards.
- At the top of the tablet, nudge the blue plastic opening tool between the back plastic casing and the front panel’s metal rim.
- Do not use excessive force when prying the clips, fastening the casing together, open because they can easily break.
Before disassembling your Samsung Galaxy Tab 4 8.0, be sure it is powered off and you remove the SIM and Micro SD cards.
At the top of the tablet, nudge the blue plastic opening tool between the back plastic casing and the front panel’s metal rim.
Do not use excessive force when prying the clips, fastening the casing together, open because they can easily break.
1024
Step 2
- Continue prying the blue plastic opening tool along the perimeter of the tablet to separate the back plastic casing from the front assembly panel.
- As right-handers, we found it easiest to move clockwise and use more pressure around the corners to facilitate the process.
- You might hear several popping noises caused by the plastic clips coming undone.
Continue prying the blue plastic opening tool along the perimeter of the tablet to separate the back plastic casing from the front assembly panel.
As right-handers, we found it easiest to move clockwise and use more pressure around the corners to facilitate the process.
You might hear several popping noises caused by the plastic clips coming undone.
Step 3
- To avoid damaging the screen, gently set the tablet with the LCD screen faced down.
- Firmly grasp the back plastic casing and lift it away from the front assembly panel.
To avoid damaging the screen, gently set the tablet with the LCD screen faced down.
Firmly grasp the back plastic casing and lift it away from the front assembly panel.
Step 4
Front Facing Camera
- The front camera’s ribbon cable is located just above the battery, slightly to the left.
- Carefully insert the flat end of the blue plastic opening tool under the connector at the end of the ribbon cable.
The front camera’s ribbon cable is located just above the battery, slightly to the left.
Carefully insert the flat end of the blue plastic opening tool under the connector at the end of the ribbon cable.
Step 5
- Slightly apply pressure and move the blue plastic opening tool downwards to pop the front camera’s gold rectangular connector from its socket on the motherboard.
Slightly apply pressure and move the blue plastic opening tool downwards to pop the front camera’s gold rectangular connector from its socket on the motherboard.
Step 6
- Squeeze the gold rectangular piece with the tweezers to gently lift it from its pit.
Squeeze the gold rectangular piece with the tweezers to gently lift it from its pit.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 7 other contributors
Ofelia Cruz
Member since: 09/14/2015
1,119 Reputation
5 Guides authored
Badges:
20
+17 more badges
Team
CSU Fullerton, Team 1-3, Bruce Fall 2015
Member of CSU Fullerton, Team 1-3, Bruce Fall 2015
CSUF-BRUCE-F15S1G3
4 Members
12 Guides authored