Difficulty
Moderate
Steps
12
Time Required
15 minutes
Sections
2
- Motherboard
- 10 steps
- Speaker
- 2 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackSamsung Galaxy Tab 4 8.0 Verizon
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Slightly apply pressure and move the blue plastic opening tool downwards to pop the metallic rectangular connector from its socket on the mother board.
Slightly apply pressure and move the blue plastic opening tool downwards to pop the metallic rectangular connector from its socket on the mother board.
1024
Step 2
- Slightly apply pressure and move the blue plastic opening tool downwards to pop the gold rectangular connector from its socket on the mother board.
Slightly apply pressure and move the blue plastic opening tool downwards to pop the gold rectangular connector from its socket on the mother board.
Step 3
- Slightly apply pressure and move the blue plastic opening tool downwards to pop the gold square connector from its socket on the mother board.
Slightly apply pressure and move the blue plastic opening tool downwards to pop the gold square connector from its socket on the mother board.
Step 4
- Using the spudger gently wedge the blue wire out of its compartment.
Using the spudger gently wedge the blue wire out of its compartment.
Step 5
- Remove two 2 mm #000 Phillips screws securing the metallic charger port cover to both the logic board and the front panel.
Remove two 2 mm #000 Phillips screws securing the metallic charger port cover to both the logic board and the front panel.
Step 6
- Squeeze the metal charger port cover piece with the tweezers to gently lift it from it’s place.
Squeeze the metal charger port cover piece with the tweezers to gently lift it from it’s place.
Step 7
- Carefully insert the flat end of the blue plastic opening tool under the black plastic fastener and lift.
- Rotate your tablet counter clockwise to facilitate the process.
Carefully insert the flat end of the blue plastic opening tool under the black plastic fastener and lift.
Rotate your tablet counter clockwise to facilitate the process.
Step 8
- Squeeze the golden cable with the tweezers and gently pull the cable to the left to free the end of the golden cable.
- The golden cable is delicate so use gentle force.
Squeeze the golden cable with the tweezers and gently pull the cable to the left to free the end of the golden cable.
The golden cable is delicate so use gentle force.
Step 9
- Remove three 2 mm #000 Phillips screws securing the mother board to the front panel.
Remove three 2 mm #000 Phillips screws securing the mother board to the front panel.
Step 10
- Using your hands, hold the opposite ends of the mother board corners, and lift.
Using your hands, hold the opposite ends of the mother board corners, and lift.
Step 11
Speaker
- Insert the opening tool tip into the crack between the speaker and device.
Insert the opening tool tip into the crack between the speaker and device.
Step 12
- Gently pry up on the speaker to disconnect the speaker from the device.
Gently pry up on the speaker to disconnect the speaker from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Chandler Davis Beale
Member since: 02/20/2020
331 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
The Citadel Military College of South Carolina, Team S1-G2, Eggleston Spring 2020
Member of The Citadel Military College of South Carolina, Team S1-G2, Eggleston Spring 2020
CMCSC-EGGLESTON-S20S1G2
3 Members
3 Guides authored