Samsung Galaxy Tab 8 9 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          10 - 20 minutes            

Sections

1

• Battery
• 10 steps

Flags

0

• BackSamsung Galaxy Tab 8.9

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Insert a plastic opening tool between the back cover and the screen of the Samsung Galaxy Tab 8.9.

Insert a plastic opening tool between the back cover and the screen of the Samsung Galaxy Tab 8.9.

1024

Step 2

• 6 cm [2 in] away from the first plastic opening tool, insert a second plastic opening tool between the back cover and the screen.

6 cm [2 in] away from the first plastic opening tool, insert a second plastic opening tool between the back cover and the screen.

Step 3

• Slide the second plastic opening tool along the edge of the device to separate the back cover from the screen.

Slide the second plastic opening tool along the edge of the device to separate the back cover from the screen.

Step 4

• Use your hands to open the back cover.

Use your hands to open the back cover.

Step 5

              Remove Green Tape               

• Use tweezers to peel up the green tape located on top of the two flexible ribbon cables.

Use tweezers to peel up the green tape located on top of the two flexible ribbon cables.

Step 6

• Insert a spudger under the orange tab.
• Gently pry up the tab to disconnect the black flexible ribbon cable from the motherboard.

Insert a spudger under the orange tab.

Gently pry up the tab to disconnect the black flexible ribbon cable from the motherboard.

Step 7

• Carefully pull out the yellow flexible ribbon cable to disconnect it from the motherboard.

Carefully pull out the yellow flexible ribbon cable to disconnect it from the motherboard.

Step 8

              Disconnect Battery from MotherBoard               

• Insert the spudger under the red, black, and white cables.
• Pry up and detach the battery from the motherboard.

Insert the spudger under the red, black, and white cables.

Pry up and detach the battery from the motherboard.

Step 9

• Use a Phillips #00 screwdriver to remove the nine 1 mm screws located around the battery.

Use a Phillips #00 screwdriver to remove the nine 1 mm screws located around the battery.

Step 10

              Remove the Battery               

• Use a spudger to lift up and separate the battery from its housing.

Use a spudger to lift up and separate the battery from its housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 10 other contributors 

                    Dan D                     

Member since: 09/25/2014

160 Reputation

                                      1 Guide authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       USF Tampa, Team 11-4, Blackwell Fall 2014                        

                                                  Member of USF Tampa, Team 11-4, Blackwell Fall 2014 



                    USFT-BLACKWELL-F14S11G4                     


                                            4 Members                     


                                            10 Guides authored                     

Paul Jackson - Mar 8, 2018

Reply

Step 8 Clearer to say:

Insert the spudger under the red, black, and white cables to pry up the battery connector and detach it and the battery from the motherboard.