Difficulty

Moderate

Steps

2

Time Required

                          5 - 10 minutes

Sections

1

  • Back Panel
  • 2 steps

Flags

0

  • BackSamsung Galaxy Tab A 10.1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Have the front of the device facing you.
  • Begin near one of the curved edges of the device (see photo two for visual example).
  • Place a plastic opening tool between the front and back panels.
  • If a plastic opening tool doesn’t work, using a metal spudger may work, but it may damage the plastic on the device.
  • Remember to remove the micro SD card (if present) before you begin.

Have the front of the device facing you.

Begin near one of the curved edges of the device (see photo two for visual example).

Place a plastic opening tool between the front and back panels.

If a plastic opening tool doesn’t work, using a metal spudger may work, but it may damage the plastic on the device.

Remember to remove the micro SD card (if present) before you begin.

1024

Step 2

  • Once the plastic opening tool is fully inserted, wedge it around the device’s edges to separate the panels.
  • Lift the back panel off of the device.
  • The back panel will make a clicking noise while being lifted off of the device.

Once the plastic opening tool is fully inserted, wedge it around the device’s edges to separate the panels.

Lift the back panel off of the device.

The back panel will make a clicking noise while being lifted off of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      9 other people completed this guide.

Author

                                      with 11 other contributors 


                    Isabella Li

Member since: 10/02/2017

2,280 Reputation

                                      7 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Cal Poly, Team S15-G6, Livingston Fall 2017                        

                                                  Member of Cal Poly, Team S15-G6, Livingston Fall 2017 



                    CPSU-LIVINGSTON-F17S15G6                     


                                            4 Members                     


                                            26 Guides authored

nabe_03 - Jun 2, 2018

Reply

Why need to remove cables when only the back has to be replaced ?