Samsung Galaxy Tab A 10 1 S Pen Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Battery
3 steps
Screen
2 steps

Flags

BackSamsung Galaxy Tab A 10.1 S-Pen
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Remove all external power and turn off the tablet.
Insert a plastic opening tool between the screen and rear casing.
Pry the screen and rear casing apart.

Remove all external power and turn off the tablet.

Insert a plastic opening tool between the screen and rear casing.

Pry the screen and rear casing apart.

1024

Step 2

Remove the three green pieces of tape covering the white, black, and gold ribbon cables.
Use a spudger to flip up the retaining flap on the three ribbon cable ZIF sockets.
Pull the ribbon cables out of the sockets.

Remove the three green pieces of tape covering the white, black, and gold ribbon cables.

Use a spudger to flip up the retaining flap on the three ribbon cable ZIF sockets.

Pull the ribbon cables out of the sockets.

Step 3

Remove the ten 4mm Phillips #000 screws from the battery.
Use a plastic opening tool to pry up the battery.
Remove the battery.

Remove the ten 4mm Phillips #000 screws from the battery.

Use a plastic opening tool to pry up the battery.

Remove the battery.

Step 4

              Screen

Remove the six 4mm Phillips #000 screws from the motherboard.
Use a spudger to flip up the retaining flap on the ribbon cable ZIF sockets.
Use the plastic opening tool to remove the motherboard from the case.

Remove the six 4mm Phillips #000 screws from the motherboard.

Use a spudger to flip up the retaining flap on the ribbon cable ZIF sockets.

Use the plastic opening tool to remove the motherboard from the case.

Step 5

Insert a plastic opening tool between the screen and bezel.
Slide the plastic opening tool around the perimeter while prying upwards until the screen separates from the bezel.
The screen may crack during this process so be wary of broken glass.
Applying heat may be necessary to loosen the glue.

Insert a plastic opening tool between the screen and bezel.

Slide the plastic opening tool around the perimeter while prying upwards until the screen separates from the bezel.

The screen may crack during this process so be wary of broken glass.

Applying heat may be necessary to loosen the glue.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors

                    Guneet Bawa

Member since: 04/12/2018

658 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UW Tacoma, Team S1-G5, Liner Spring 2018                        

                                                  Member of UW Tacoma, Team S1-G5, Liner Spring 2018 



                    UWT-LINER-S18S1G5                     


                                            5 Members                     


                                            8 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team