Difficulty
Moderate
Steps
7
Time Required
8 - 10 minutes
Sections
2
- Battery
- 3 steps
- Speaker
- 4 steps
Flags
0
BackSamsung Galaxy Tab A 10.1 S-Pen
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove all external power and turn off the tablet.
- Insert a plastic opening tool between the screen and rear casing.
- Pry the screen and rear casing apart.
Remove all external power and turn off the tablet.
Insert a plastic opening tool between the screen and rear casing.
Pry the screen and rear casing apart.
1024
Step 2
- Remove the three green pieces of tape covering the white, black, and gold ribbon cables.
- Use a spudger to flip up the retaining flap on the three ribbon cable ZIF sockets.
- Pull the ribbon cables out of the sockets.
Remove the three green pieces of tape covering the white, black, and gold ribbon cables.
Use a spudger to flip up the retaining flap on the three ribbon cable ZIF sockets.
Pull the ribbon cables out of the sockets.
Step 3
- Remove the ten 4mm Phillips #000 screws from the battery.
- Use a plastic opening tool to pry up the battery.
- Remove the battery.
Remove the ten 4mm Phillips #000 screws from the battery.
Use a plastic opening tool to pry up the battery.
Remove the battery.
Step 4
Speaker
- Use a spudger to flip up the retaining flap on the ribbon cable ZIF socket.
Use a spudger to flip up the retaining flap on the ribbon cable ZIF socket.
Step 5
- Remove the ribbon cable from the socket.
Remove the ribbon cable from the socket.
Step 6
- Remove the two 4mm Phillips #000 screws from the speakers.
Remove the two 4mm Phillips #000 screws from the speakers.
Step 7
- Use a plastic opening tool to pry the speakers out of the tablet
Use a plastic opening tool to pry the speakers out of the tablet
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Guneet Bawa
Member since: 04/12/2018
658 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
UW Tacoma, Team S1-G5, Liner Spring 2018
Member of UW Tacoma, Team S1-G5, Liner Spring 2018
UWT-LINER-S18S1G5
5 Members
8 Guides authored