Difficulty
Moderate
Steps
4
Time Required
20 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackSamsung Galaxy Tab A 7.0
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Using the plastic opening tool, starting at any corner on the tablet, insert the tool between the back panel and the front panel.
- Slide tool around the tablet to unlock the panels from one another.
Using the plastic opening tool, starting at any corner on the tablet, insert the tool between the back panel and the front panel.
Slide tool around the tablet to unlock the panels from one another.
1024
Step 2
- Carefully remove the back panel from the front panel.
- The inner components of the tablet will now be exposed.
Carefully remove the back panel from the front panel.
The inner components of the tablet will now be exposed.
Step 3
- Using tweezers, gently lift the black tab locking the wire connecting the battery to the motherboard.
- Pull wire from connector.
- This is the only connection for the battery to the motherboard.
Using tweezers, gently lift the black tab locking the wire connecting the battery to the motherboard.
Pull wire from connector.
This is the only connection for the battery to the motherboard.
Step 4
- Remove the battery from the device.
- Separating tool may be needed in order to lift battery from device.
Remove the battery from the device.
Separating tool may be needed in order to lift battery from device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
12 other people completed this guide.
Author
with 2 other contributors
Bradley Watson
Member since: 02/15/2017
1,001 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team 5-4, Passmore Spring 2017
Member of USF Tampa, Team 5-4, Passmore Spring 2017
USFT-PASSMORE-S17S5G4
3 Members
8 Guides authored
brunius - Jul 21, 2020
Reply
I found there was a layer of double-sided tape backing the battery, and I had to use a flathead screwdriver to get enough force to lever it up. This does not significantly change the guide.