Difficulty
Moderate
Steps
6
Time Required
15 - 30 minutes
Sections
1
- Front Camera
- 6 steps
Flags
0
BackSamsung Galaxy Tab A 9.7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Camera
- Pry along the edge of the Samsung Galaxy Tab A 9.7 with an iFixit opening tool.
Pry along the edge of the Samsung Galaxy Tab A 9.7 with an iFixit opening tool.
1024
Step 2
- Insert a second iFixit opening tool along the edge and begin to pry open the back cover a little with each one.
Insert a second iFixit opening tool along the edge and begin to pry open the back cover a little with each one.
Step 3
- Remove one of the opening tools and begin to go around the device with the other one until the back cover pops off.
Remove one of the opening tools and begin to go around the device with the other one until the back cover pops off.
Step 4
- Locate the camera at the top of the device.
Locate the camera at the top of the device.
Step 5
- Pull up carefully on the orange strip using the tweezers.
- The lever holding the strip in place will pop up, releasing the camera.
Pull up carefully on the orange strip using the tweezers.
The lever holding the strip in place will pop up, releasing the camera.
Step 6
- Remove the front camera and replace it with the new part.
Remove the front camera and replace it with the new part.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Makenzie D'Elia
Member since: 04/09/2019
313 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
IUPUI, Team S1-G3, Hovde Spring 2019
Member of IUPUI, Team S1-G3, Hovde Spring 2019
IUPUI-HOVDE-S19S1G3
3 Members
3 Guides authored
