Difficulty
Moderate
Steps
9
Time Required
15 - 20 minutes
Sections
4
- Back Panel
- 1 step
- Back Camera
- 1 step
- Front Camera
- 1 step
- Motherboard
- 6 steps
Flags
0
BackSamsung Galaxy Tab E 8.0
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Use the iFixit Opening Tool to pry off the back case, moving the tool around the screen.
- Make sure the device is off and the SD card is removed before taking off the back casing.
Use the iFixit Opening Tool to pry off the back case, moving the tool around the screen.
Make sure the device is off and the SD card is removed before taking off the back casing.
1024
Step 2
Back Camera
- Use the tweezers to lift the switch connecting the back camera to the motherboard.
- Use your hand to remove the back camera from the motherboard.
Use the tweezers to lift the switch connecting the back camera to the motherboard.
Use your hand to remove the back camera from the motherboard.
Step 3
Front Camera
- Use the tweezers to lift the switch connecting the front camera to the motherboard.
- Remove the front camera from the motherboard by lifting with the tweezers.
Use the tweezers to lift the switch connecting the front camera to the motherboard.
Remove the front camera from the motherboard by lifting with the tweezers.
Step 4
Motherboard
- Use the tweezers to flip the switch on the bottom of the strap that goes over the battery.
- Release the strap from the switch by lifting the strap with your hand.
Use the tweezers to flip the switch on the bottom of the strap that goes over the battery.
Release the strap from the switch by lifting the strap with your hand.
Step 5
- Use the tweezers to flip the switch that connects the top of the strap to the motherboard.
- Lift the top end of the strap with your hand and remove the strap completely from the device.
Use the tweezers to flip the switch that connects the top of the strap to the motherboard.
Lift the top end of the strap with your hand and remove the strap completely from the device.
Step 6
- Use the tweezers to flip the switch of the connector.
- Lift the connector from the motherboard.
- This connector does not come completely off, but disconnects from the motherboard.
Use the tweezers to flip the switch of the connector.
Lift the connector from the motherboard.
This connector does not come completely off, but disconnects from the motherboard.
Step 7
- Use the tweezers to flip the switch of the blue connector on the motherboard.
- Lift the connector from the motherboard.
- This switch can detach from the device, but just needs to disconnect from the motherboard.
- Ensure the blue ribbon cable is not under the motherboard upon reassembly.
Use the tweezers to flip the switch of the blue connector on the motherboard.
This switch can detach from the device, but just needs to disconnect from the motherboard.
Ensure the blue ribbon cable is not under the motherboard upon reassembly.
Step 8
- Use the tweezers to flip the switch of the connector that runs from the battery to the motherboard.
- Lift the connector from the motherboard.
- This switch can detach from the device, but just needs to disconnect from the motherboard.
Use the tweezers to flip the switch of the connector that runs from the battery to the motherboard.
This switch can detach from the device, but just needs to disconnect from the motherboard.
Step 9
- Use a JIS #00 screwdriver to remove the six 4.5mm screws at the top of the motherboard.
- Lift the motherboard with your hand to detach the motherboard from the device.
Use a JIS #00 screwdriver to remove the six 4.5mm screws at the top of the motherboard.
Lift the motherboard with your hand to detach the motherboard from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Christian Bloemhof
Member since: 10/08/2018
1,039 Reputation
7 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team S13-G4, White Fall 2018
Member of Cal Poly, Team S13-G4, White Fall 2018
CPSU-WHITE-F18S13G4
4 Members
8 Guides authored
