Difficulty
Moderate
Steps
2
Time Required
9 - 15 minutes
Sections
- Rear Panel
- 1 step
- Front Facing Camera
- 1 step
Flags
1
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackSamsung Galaxy Tab Pro 10.1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Panel
- Be gentle, the front panel is connected to sensitive wiring that may snap if too much pressure is applied.
- Insert a plastic opening tool into the crevice between the screen and the side of the tablet.
- Go around the entire crevice with the plastic opening tool.
- Set aside the separated front and rear panels of the device.
Be gentle, the front panel is connected to sensitive wiring that may snap if too much pressure is applied.
Insert a plastic opening tool into the crevice between the screen and the side of the tablet.
Go around the entire crevice with the plastic opening tool.
Set aside the separated front and rear panels of the device.
1024
Step 2
Front Facing Camera
- Use plastic tweezers to carefully detach the front-facing camera from the motherboard.
Use plastic tweezers to carefully detach the front-facing camera from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Stephen Yeung
Member since: 08/26/2015
1,490 Reputation
6 Guides authored
Badges:
20
+17 more badges
