Difficulty

Easy

Steps

10

Time Required

                          5 minutes

Sections

3

  • Battery
  • 5 steps
  • Motherboard
  • 3 steps
  • Back Camera
  • 2 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackSamsung Galaxy Tab Pro 8.4

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Begin by separating the back panel from the screen glass assembly using the plastic opening tool.
  • Insert the plastic opening tool between the edge of the glass screen and the metal frame around the device.

Begin by separating the back panel from the screen glass assembly using the plastic opening tool.

Insert the plastic opening tool between the edge of the glass screen and the metal frame around the device.

1024

Step 2

  • Continue around the entire device until the back panel is completely separated from the screen.

Continue around the entire device until the back panel is completely separated from the screen.

Step 3

  • Remove the four 2.5mm Phillips #000 screws.

Remove the four 2.5mm Phillips #000 screws.

Step 4

  • Gently pull up on the plastic tab that has red, blue and black wires that connects the battery to the motherboard.

Gently pull up on the plastic tab that has red, blue and black wires that connects the battery to the motherboard.

Step 5

  • The battery should be completely disconnected and the new one can be installed.

The battery should be completely disconnected and the new one can be installed.

Step 6

              Motherboard
  • Remove all the clips that are attached to the motherboard using your fingers or a nylon spudger.

Remove all the clips that are attached to the motherboard using your fingers or a nylon spudger.

Step 7

  • There are four Phillips head screws (2.5mm) that need to be removed:
  • Two on the charging port, which is the small metallic piece at the bottom of the device.
  • There is one screw that is covered by a small green tape. The tape must be peeled off before the screw under can be removed.
  • The last screw is found on a speaker at the bottom right of the device. Once the screw is removed, the speaker must be removed as well.

There are four Phillips head screws (2.5mm) that need to be removed:

Two on the charging port, which is the small metallic piece at the bottom of the device.

There is one screw that is covered by a small green tape. The tape must be peeled off before the screw under can be removed.

The last screw is found on a speaker at the bottom right of the device. Once the screw is removed, the speaker must be removed as well.

Step 8

  • There is a small wire that connects the motherboard to the bottom right corner.
  • Gently pull the end of the wire that attaches the motherboard to the device until the wire is disconnected.
  • After the cord is disconnected, the motherboard can be removed from the tablet by simply lifting it from the device.

There is a small wire that connects the motherboard to the bottom right corner.

Gently pull the end of the wire that attaches the motherboard to the device until the wire is disconnected.

After the cord is disconnected, the motherboard can be removed from the tablet by simply lifting it from the device.

Step 9

              Back Camera
  • Once the motherboard has been removed, use a plastic opening tool to gently push the camera out of its place.

Once the motherboard has been removed, use a plastic opening tool to gently push the camera out of its place.

Step 10

  • Using your fingers, gently pull the camera out of its place.

Using your fingers, gently pull the camera out of its place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Mario Montoya

Member since: 09/12/2016

225 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team 9-2, Lacy Fall 2016                        

                                                  Member of USF Tampa, Team 9-2, Lacy Fall 2016 



                    USFT-LACY-F16S9G2                     


                                            4 Members                     


                                            10 Guides authored