Difficulty

Moderate

Steps

5

Time Required

                          1 hour

Sections

1

  • Front-Facing Camera
  • 5 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSamsung Galaxy TabPro S

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front-Facing Camera
  • Remove the back of the tablet by prying the plastic back using a flat tool.
  • When the tool has been inserted under the back, slide it all the way around the tablet to fully unclip it.

Remove the back of the tablet by prying the plastic back using a flat tool.

When the tool has been inserted under the back, slide it all the way around the tablet to fully unclip it.

1024

Step 2

  • Once the back has been removed, disconnect all cables using a pair of tweezers to avoid damaging any components.
  • Once the cables have been disconnected, remove the battery using a flat plastic tool (not the metal spudger).

Once the back has been removed, disconnect all cables using a pair of tweezers to avoid damaging any components.

Once the cables have been disconnected, remove the battery using a flat plastic tool (not the metal spudger).

Step 3

  • Use a Phillips #0 screwdriver to remove the screws that secure the motherboard.
  • Remove the metal plate once the screws are gone and the motherboard will be ready to be replaced.

Use a Phillips #0 screwdriver to remove the screws that secure the motherboard.

Remove the metal plate once the screws are gone and the motherboard will be ready to be replaced.

Step 4

  • Remove motherboard by prying it up with a flat plastic opening tool (not metal spudger).
  • Be sure that all components have been disconnected beforehand, especially the front-facing camera (located above the motherboard in the top center of the frame).

Remove motherboard by prying it up with a flat plastic opening tool (not metal spudger).

Be sure that all components have been disconnected beforehand, especially the front-facing camera (located above the motherboard in the top center of the frame).

Step 5

  • Once the camera has been disconnected from the motherboard, it can be removed using a pair of pliers.

Once the camera has been disconnected from the motherboard, it can be removed using a pair of pliers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Mitchell Caister

Member since: 03/31/2022

313 Reputation

                                      3 Guides authored                  



                       Badges:
                       3

Team

                       IUPUI, Team 3-4, Harley Spring 2022                        

                                                  Member of IUPUI, Team 3-4, Harley Spring 2022 



                    IUPUI-HARLEY-S22S3G4                     


                                            3 Members                     


                                            3 Guides authored