Samsung Galaxy View Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 25 minutes

Sections

Kickstand
2 steps
Battery
5 steps

Flags

BackSamsung Galaxy View
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Kickstand

Place the device on a hard flat surface with its screen facing downwards.
Rotate the the kickstand so that the handle grip hole is up in the air and not touching the back of the tablet.

Place the device on a hard flat surface with its screen facing downwards.

Rotate the the kickstand so that the handle grip hole is up in the air and not touching the back of the tablet.

1024

Step 2

Stick the pointy end of the spudger into the circular opening of the leftmost metallic latch.
With the spudger still inserted, pry the spudger to the right pushing the latch opening along with it.
Once the latch is moved to the right, pull up on the left side of the kickstand, releasing it from the back of the tablet.
Repeat the previous steps for the rightmost latch, and then lift the kickstand off the back of the tablet.

Stick the pointy end of the spudger into the circular opening of the leftmost metallic latch.

With the spudger still inserted, pry the spudger to the right pushing the latch opening along with it.

Once the latch is moved to the right, pull up on the left side of the kickstand, releasing it from the back of the tablet.

Repeat the previous steps for the rightmost latch, and then lift the kickstand off the back of the tablet.

Step 3

              Battery

Check the device is completely turned off.
Slide open the SD compartment tab, and remove the SD card to ensure all data is saved.

Check the device is completely turned off.

Slide open the SD compartment tab, and remove the SD card to ensure all data is saved.

Step 4

Remove the 4 screws (4 mm in length) using the Phillips #0 screwdriver.

Remove the 4 screws (4 mm in length) using the Phillips #0 screwdriver.

Step 5

Insert the plastic opening tool between the seam of the back panel and the front casing to create an initial opening.
Insert the metal spudger within the opening.
Move the metal spudger down the seam, prying the back panel open as you go.
Once a large enough opening is made, pry the entire back panel off with your hand.
You will hear loud popping from the magnetized latches. This is not causing damage to the device and will require some force to open.

Insert the plastic opening tool between the seam of the back panel and the front casing to create an initial opening.

Insert the metal spudger within the opening.

Move the metal spudger down the seam, prying the back panel open as you go.

Once a large enough opening is made, pry the entire back panel off with your hand.

You will hear loud popping from the magnetized latches. This is not causing damage to the device and will require some force to open.

Step 6

Using the plastic opening tool, lift off the orange press-fit connector (marked with a white arrow-head) where it attaches to the motherboard.

Using the plastic opening tool, lift off the orange press-fit connector (marked with a white arrow-head) where it attaches to the motherboard.

Step 7

Remove the 6 screws (4 mm in length) using the Phillips #0 screwdriver.
Remove the battery from the device.

Remove the 6 screws (4 mm in length) using the Phillips #0 screwdriver.

Remove the battery from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      37 other people completed this guide.

Author

                                      with 4 other contributors

                    Roger Pena

Member since: 10/06/2016

1,078 Reputation

                                      1 Guide authored                  



                       Badges:
                       16







                                                        +13 more badges

Team

                       Cal Poly, Team 4-5, Livingston Fall 2016                        

                                                  Member of Cal Poly, Team 4-5, Livingston Fall 2016 



                    CPSU-LIVINGSTON-F16S4G5                     


                                            4 Members                     


                                            12 Guides authored

Swheet - Mar 12, 2018

I’m not sure if it’s the battery or the cord

Ricky Lee Lidel - Mar 24, 2018

What size is the battery that fits into the SAMSUNG TAB VIEW?

Mike Rowe - Apr 26, 2018

Thank You, Sooo much. This guide is a true money and time saver. Worked like a gem .

Sue ELLEN R FONTENOT - Oct 23, 2018

I can’t find Lithium ION 11.3 V 5700mAh battery for my Samsung Galaxy 18.4View Tablet, does anyone know where to get one?

What’s difference between a 5700mAh battery and 5900mAh battery

Greg Dover - Oct 30, 2019

Where can I find battery replacement for galaxy view

Introduction#

What you need#

Team#

Introduction

What you need

Team