Difficulty

Moderate

Steps

5

Time Required

                          10 - 20 minutes

Sections

2

  • Back Panel
  • 1 step
  • LCD Display
  • 4 steps

Flags

0

  • BackSamsung Galaxy Y

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Use the blue plastic opening tool to pry the back-panel off of the device.

Use the blue plastic opening tool to pry the back-panel off of the device.

1024

Step 2

              LCD Display
  • Use a Phillips #000 screwdriver to remove the four 5mm screws located in the corner of the interior back panel.
  • Remove the SD card as well by sliding the card out of it’s slot.

Use a Phillips #000 screwdriver to remove the four 5mm screws located in the corner of the interior back panel.

Remove the SD card as well by sliding the card out of it’s slot.

Step 3

  • Use the metal pry tool to separate the interior back panel from the interior hardware and screen.

Use the metal pry tool to separate the interior back panel from the interior hardware and screen.

Step 4

  • Disconnect the orange motherboard connection, then remove the interior hardware from the front screen display.

Disconnect the orange motherboard connection, then remove the interior hardware from the front screen display.

Step 5

  • Gently remove the LCD screen lens from the outer screen using a pair of tweezers and the metal pry tool. Replace the faulty LCD.
  • The LCD maybe be glued in place, so the device might need to be heated to remove the part.

Gently remove the LCD screen lens from the outer screen using a pair of tweezers and the metal pry tool. Replace the faulty LCD.

The LCD maybe be glued in place, so the device might need to be heated to remove the part.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Aidan Kurz

Member since: 09/21/2018

387 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       University of North Texas, Team S5-G4, Thompson Fall 2018                        

                                                  Member of University of North Texas, Team S5-G4, Thompson Fall 2018 



                    UNT-THOMPSON-F18S5G4                     


                                            4 Members                     


                                            6 Guides authored