Samsung Gravity Txt Microsd Card Replacement Repair Guide

Difficulty

Very easy

Steps

4

Time Required

                          1 - 2 minutes            

Sections

2

• Battery
• 3 steps
• microSD Card
• 1 step

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSamsung Gravity TXT

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Battery               

• Pry the back cover off with a plastic opening tool, or your fingernail, in the indentation on the bottom of the device.

Pry the back cover off with a plastic opening tool, or your fingernail, in the indentation on the bottom of the device.

1024

Step 2

• Lift the back cover away from the main body of the phone.

Lift the back cover away from the main body of the phone.

Step 3

• Insert your finger in the groove below the battery.
• Press the battery toward the audio jack while lifting upward and away from the phone.
• Remember to place the battery back with the copper contacts on the battery lined up with those on the phone.

Insert your finger in the groove below the battery.

Press the battery toward the audio jack while lifting upward and away from the phone.

Remember to place the battery back with the copper contacts on the battery lined up with those on the phone.

Step 4

              microSD Card               

• Using your fingernail, push the microSD card slightly deeper into the slot, until you hear a click.
• The removal of the battery is not required for this operation; therefore, step 3 can be skipped if just replacing the microSD card.
• After the click, release the microSD card to allow it to pop out.
• Remove the microSD card from its slot
• When placing the microSD card back in the phone, make sure the card clicks in place.

Using your fingernail, push the microSD card slightly deeper into the slot, until you hear a click.

The removal of the battery is not required for this operation; therefore, step 3 can be skipped if just replacing the microSD card.

After the click, release the microSD card to allow it to pop out.

Remove the microSD card from its slot

When placing the microSD card back in the phone, make sure the card clicks in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Mounir Karmada                     

Member since: 07/07/2015

465 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       IUPUI, Team 1-1, Renguette SU 2015                        

                                                  Member of IUPUI, Team 1-1, Renguette SU 2015 



                    IUPUI-RENGUETTE-SU15S1G1                     


                                            5 Members                     


                                            16 Guides authored