Difficulty
Moderate
Steps
3
Time Required
10 - 15 minutes
Sections
1
- Speaker
- 3 steps
Flags
2
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
Better Introduction
Improve this guide by completing or revising its introduction.
BackSamsung Gusto 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Speaker
- Flip open the phone as shown in picture 1.
- Remove the two screws highlighted in picture 1.
Flip open the phone as shown in picture 1.
Remove the two screws highlighted in picture 1.
1024
Step 2
- Take your spudger and forcefully insert it between the black and silver part of the phone.
- Once the spudger is successfully wedged in between these two pieces, circle the frame of the phone.
Take your spudger and forcefully insert it between the black and silver part of the phone.
Once the spudger is successfully wedged in between these two pieces, circle the frame of the phone.
Step 3
- The phone should be exposed like picture 1 once the case was removed.
- The highlighted sections correspond to the bullet colors. To replace either simply disconnect the wires attached, and lift the piece off.
- Speaker Component
- Vibration Component
The phone should be exposed like picture 1 once the case was removed.
The highlighted sections correspond to the bullet colors. To replace either simply disconnect the wires attached, and lift the piece off.
Speaker Component
Vibration Component
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Michael Huang
Member since: 03/30/2015
403 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
UMass Dartmouth, Team 2-5, Shastany Spring 2015
Member of UMass Dartmouth, Team 2-5, Shastany Spring 2015
UMASSD-SHASTANY-S15S2G5
3 Members
10 Guides authored