Difficulty

Moderate

Steps

7

Time Required

                          5 - 8 minutes

Sections

3

  • Battery
  • 1 step
  • Strap Side Outer Casing
  • 4 steps
  • Hand Strap
  • 2 steps

Flags

0

  • BackSamsung HMX-F90

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Pull the release tab away from the battery.
  • Slide the battery towards the release tab and then pull the battery away from the camcorder.

Pull the release tab away from the battery.

Slide the battery towards the release tab and then pull the battery away from the camcorder.

1024

Step 2

              Strap Side Outer Casing
  • Rotate the camcorder so that the strap side is facing you.
  • Locate and remove the three 4.5mm Phillips #00 screws around the hand strap.

Rotate the camcorder so that the strap side is facing you.

Locate and remove the three 4.5mm Phillips #00 screws around the hand strap.

Step 3

  • Rotate the camcorder so that the battery slot is facing you.
  • Located in the top left corner of the battery slot, remove the 4.5mm Phillips #00 screw.

Rotate the camcorder so that the battery slot is facing you.

Located in the top left corner of the battery slot, remove the 4.5mm Phillips #00 screw.

Step 4

  • Rotate the camcorder so you are looking at the bottom of the camcorder.
  • Locate and remove the last three 4.5mm Phillips #00 screws.

Rotate the camcorder so you are looking at the bottom of the camcorder.

Locate and remove the last three 4.5mm Phillips #00 screws.

Step 5

  • With both hands, pull the side strap apart from the rest of the camcorder.

With both hands, pull the side strap apart from the rest of the camcorder.

Step 6

              Hand Strap
  • Unfasten the strap from the outside.
  • Pull apart the velcro on the faux leather strap sheath to reveal the separate end of the strap.
  • The loose end can be pulled off the velcro and fed through the loop on the casing to free one end of the strap.

Unfasten the strap from the outside.

Pull apart the velcro on the faux leather strap sheath to reveal the separate end of the strap.

The loose end can be pulled off the velcro and fed through the loop on the casing to free one end of the strap.

Step 7

  • On the inside of the opened case, locate the silver metal plate and remove the 3mm Phillips screw.
  • Feed the strap through the hole to remove completely so that it can be replaced or cleaned.

On the inside of the opened case, locate the silver metal plate and remove the 3mm Phillips screw.

Feed the strap through the hole to remove completely so that it can be replaced or cleaned.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Amir Harb

Member since: 09/26/2017

697 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team S13-G1, Boczar Fall 2017                        

                                                  Member of USF Tampa, Team S13-G1, Boczar Fall 2017 



                    USFT-BOCZAR-F17S13G1                     


                                            4 Members                     


                                            12 Guides authored