Samsung Hmx W200 Camera Lens Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Outer Case
8 steps
Motherboard
6 steps
Camera Lens
4 steps

Flags

BackSamsung HMX-W200
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Outer Case

Remove the 5.00mm screw on the right of the LCD display towards the bottom of the device by using a Phillips #00 screwdriver.

Remove the 5.00mm screw on the right of the LCD display towards the bottom of the device by using a Phillips #00 screwdriver.

1024

Step 2

Use the plastic opening tool to separate and remove the bottom red casing. Do this by, pushing the tool into the seam and prying up the red casing as you move along the edges.
Make sure to separate all the corners before removing the red casing.

Use the plastic opening tool to separate and remove the bottom red casing. Do this by, pushing the tool into the seam and prying up the red casing as you move along the edges.

Make sure to separate all the corners before removing the red casing.

Step 3

Using the plastic opening tool, separate and pull away the red casing on the right of the LCD screen.
Make sure to separate all the corners before removing the red casing.

Using the plastic opening tool, separate and pull away the red casing on the right of the LCD screen.

Step 4

To access the HDMI slot, move slider towards the bottom of the casing on the other side of the camcorder. The lid casing will lift up upon doing so.
After accessing the HDMI slot you will find a 5.00mm screw. Using a Phillips #00 screwdriver, remove the screw.

To access the HDMI slot, move slider towards the bottom of the casing on the other side of the camcorder. The lid casing will lift up upon doing so.

After accessing the HDMI slot you will find a 5.00mm screw. Using a Phillips #00 screwdriver, remove the screw.

Step 5

Using the plastic opening tool, separate and pull away the red casing to the left of the LCD screen.
Make sure to separate all the corners before removing the red casing.

Using the plastic opening tool, separate and pull away the red casing to the left of the LCD screen.

Step 6

Remove the six 5.00mm screws by using a Phillips #00 screwdriver.

Remove the six 5.00mm screws by using a Phillips #00 screwdriver.

Step 7

Lift the two plastic tabs on the left side of the LCD screen and the single one on the right side on the black casing to open the device.

Lift the two plastic tabs on the left side of the LCD screen and the single one on the right side on the black casing to open the device.

Step 8

Separate the front and back casing.

Separate the front and back casing.

Step 9

              Motherboard

Once inside the device, find the half that contains the motherboard of the device.

Once inside the device, find the half that contains the motherboard of the device.

Step 10

Use precision tweezers to gently pull out the USB connection from the motherboard.

Use precision tweezers to gently pull out the USB connection from the motherboard.

Step 11

Remove the audio connector from the motherboard (red and black cables).
Using the plastic opening tool, lift the connectors from all sides before pulling it with your fingers.
Do not pull off the connectors by the cables. This could damage the connection from the speaker to the motherboard.

Remove the audio connector from the motherboard (red and black cables).

Using the plastic opening tool, lift the connectors from all sides before pulling it with your fingers.

Do not pull off the connectors by the cables. This could damage the connection from the speaker to the motherboard.

Step 12

Use precision tweezers to remove the connector joining the LCD and the motherboard.

Use precision tweezers to remove the connector joining the LCD and the motherboard.

Step 13

Remove the six 2.00mm screws with Phillips #00 screwdriver.

Remove the six 2.00mm screws with Phillips #00 screwdriver.

Step 14

Lift motherboard from top left side and pull away gently.

Lift motherboard from top left side and pull away gently.

Step 15

              Camera Lens

Use the precision tweezers, to gently pull and remove the connector connecting lens and motherboard.

Use the precision tweezers, to gently pull and remove the connector connecting lens and motherboard.

Step 16

Using the precision tweezers, lift silver heat sync tape from motherboard.

Using the precision tweezers, lift silver heat sync tape from motherboard.

Step 17

Turn the motherboard over.
Use Phillips #00 screwdriver to unscrew four 4mm screws holding the camera lens to the motherboard.

Turn the motherboard over.

Use Phillips #00 screwdriver to unscrew four 4mm screws holding the camera lens to the motherboard.

Step 18

Gently grab the lens with your fingers and pull it away from the motherboard.
Camera lens should easily come off the motherboard when the last screw is loose.

Gently grab the lens with your fingers and pull it away from the motherboard.

Camera lens should easily come off the motherboard when the last screw is loose.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Haya Barakat

Member since: 10/04/2016

521 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team 3-6, Sullivan Fall 2016                        

                                                  Member of USF Tampa, Team 3-6, Sullivan Fall 2016 



                    USFT-SULLIVAN-F16S3G6                     


                                            4 Members                     


                                            13 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team