Difficulty

Moderate

Steps

7

Time Required

                          15 minutes

Sections

4

  • Battery
  • 2 steps
  • Back Cover
  • 2 steps
  • Circuit Board
  • 2 steps
  • Camera
  • 1 step

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackSamsung Impression

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Orient the phone with the screen facing down.
  • Using your thumb, slide the back panel away from the camera to expose the battery.

Orient the phone with the screen facing down.

Using your thumb, slide the back panel away from the camera to expose the battery.

1024

Step 2

  • Insert the tip of the spudger on the left side of the battery, opposite the direction of the white arrow.
  • Pry the battery free. It will pivot in the direction of the white arrow.

Insert the tip of the spudger on the left side of the battery, opposite the direction of the white arrow.

Pry the battery free. It will pivot in the direction of the white arrow.

Step 3

              Back Cover
  • Remove the six 3.5 mm screws using a Phillips #000 screwdriver. Make sure to unscrew in a counterclockwise direction.

Remove the six 3.5 mm screws using a Phillips #000 screwdriver. Make sure to unscrew in a counterclockwise direction.

Step 4

  • Remove the back cover by gently prying around the top and bottom edges with the spudger.
  • It may help to slide the touchscreen upwards when removing the back panel.
  • The side buttons will become loose and will fall out, so put these in a safe place.

Remove the back cover by gently prying around the top and bottom edges with the spudger.

It may help to slide the touchscreen upwards when removing the back panel.

The side buttons will become loose and will fall out, so put these in a safe place.

Step 5

              Circuit Board
  • To free the circuit board, remove the black wire that is holding it down.
  • You can remove the wire by gently prying up the gold terminator that is attached to the green circuit board. A gentle tug is all it should take.

To free the circuit board, remove the black wire that is holding it down.

You can remove the wire by gently prying up the gold terminator that is attached to the green circuit board. A gentle tug is all it should take.

Step 6

  • The circuit board will still be held on by a blue and black ribbon. Remove the entire circuit board by gently tugging the ribbon upwards.

The circuit board will still be held on by a blue and black ribbon. Remove the entire circuit board by gently tugging the ribbon upwards.

Step 7

              Camera
  • Turn the circuit board over.
  • The bottom of the camera will have a gold ribbon coming out of it which attaches to the circuit board.
  • Pull upwards on the blue rectangle where the gold ribbon ends. This will remove the camera from the circuit board.

Turn the circuit board over.

The bottom of the camera will have a gold ribbon coming out of it which attaches to the circuit board.

Pull upwards on the blue rectangle where the gold ribbon ends. This will remove the camera from the circuit board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Saul Villatoro

Member since: 04/25/2011

255 Reputation

                                      7 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 8-10, Regan Spring 2011                        

                                                  Member of Cal Poly, Team 8-10, Regan Spring 2011 



                    CPSU-REGAN-S11S8G10                     


                                            4 Members                     


                                            22 Guides authored