Difficulty
Moderate
Steps
5
Time Required
5 minutes
Sections
2
- Battery
- 2 steps
- Rear Case
- 3 steps
Flags
0
BackSamsung Jack
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Slide the battery cover downwards with pressure focused on the center of the cover.
- Lift the cover off of the phone.
Slide the battery cover downwards with pressure focused on the center of the cover.
Lift the cover off of the phone.
1024
Step 2
- Grasp the bottom left and right corners of the battery and lift it from its housing.
Grasp the bottom left and right corners of the battery and lift it from its housing.
Step 3
Rear Case
- Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.
Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.
Step 4
- The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force.
- Insert the Plastic Opening Tool in between the front and rear cases.
- Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.
The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force.
Insert the Plastic Opening Tool in between the front and rear cases.
Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.
Step 5
- Lift the rear case off of the phone.
Lift the rear case off of the phone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Paul Piller
Member since: 04/12/2011
56 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 24-57, Amido Spring 2011
Member of Cal Poly, Team 24-57, Amido Spring 2011
CPSU-AMIDO-S11S24G57
4 Members
7 Guides authored