Difficulty

Easy

Steps

8

Time Required

                          5 - 10 minutes

Sections

2

  • Battery
  • 2 steps
  • Camera/Speaker
  • 6 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSamsung Juke

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Press and hold down the button on the bottom side of the phone with your finger.

Press and hold down the button on the bottom side of the phone with your finger.

1024

Step 2

  • While holding the button down, remove the back cover of the phone.

While holding the button down, remove the back cover of the phone.

Step 3

              Camera/Speaker
  • Remove the four screws from the back of the phone using a Phillips #00 screwdriver.

Remove the four screws from the back of the phone using a Phillips #00 screwdriver.

Step 4

  • Remove the two 7.3 mm screws from the camera and the speaker at the bottom back plate of the phone using a Phillips #00 screwdriver.

Remove the two 7.3 mm screws from the camera and the speaker at the bottom back plate of the phone using a Phillips #00 screwdriver.

Step 5

  • Locate the USB port (where the charger can be plugged in). Using the iFixit opening tool, open the phone cover.
  • Failure to open USB port cover at this stage may result in damaging the device.

Locate the USB port (where the charger can be plugged in). Using the iFixit opening tool, open the phone cover.

Failure to open USB port cover at this stage may result in damaging the device.

Step 6

  • Remove the 5.5 mm screws from both sides of the camera/speaker with a Phillips #00 screwdriver.

Remove the 5.5 mm screws from both sides of the camera/speaker with a Phillips #00 screwdriver.

Step 7

  • Use the iFixit opening tool to remove the camera/speaker from the motherboard.
  • Practice caution to prevent damage to the attaching ribbon.

Use the iFixit opening tool to remove the camera/speaker from the motherboard.

Practice caution to prevent damage to the attaching ribbon.

Step 8

  • Use the iFixit opening tool to gently pry the camera/speaker off.

Use the iFixit opening tool to gently pry the camera/speaker off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 11 other contributors 


                    Renee Kuzniar

Member since: 04/13/2010

82 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 6-18, Maness Spring 2010                        

                                                  Member of Cal Poly, Team 6-18, Maness Spring 2010 



                    CPSU-MANESS-S10S6G18                     


                                            3 Members                     


                                            12 Guides authored