Difficulty
Easy
Steps
11
Time Required
Suggest a time??
Sections
3
- Battery
- 2 steps
- Camera/Speaker
- 6 steps
- Motherboard
- 3 steps
Flags
2
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackSamsung Juke
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Press and hold down the button on the bottom side of the phone with your finger.
Press and hold down the button on the bottom side of the phone with your finger.
1024
Step 2
- While holding the button down, remove the back cover of the phone.
While holding the button down, remove the back cover of the phone.
Step 3
Camera/Speaker
- Remove the four screws from the back of the phone using a Phillips #00 screwdriver.
Remove the four screws from the back of the phone using a Phillips #00 screwdriver.
Step 4
- Remove the two 7.3 mm screws from the camera and the speaker at the bottom back plate of the phone using a Phillips #00 screwdriver.
Remove the two 7.3 mm screws from the camera and the speaker at the bottom back plate of the phone using a Phillips #00 screwdriver.
Step 5
- Locate the USB port (where the charger can be plugged in). Using the iFixit opening tool, open the phone cover.
- Failure to open USB port cover at this stage may result in damaging the device.
Locate the USB port (where the charger can be plugged in). Using the iFixit opening tool, open the phone cover.
Failure to open USB port cover at this stage may result in damaging the device.
Step 6
- Remove the 5.5 mm screws from both sides of the camera/speaker with a Phillips #00 screwdriver.
Remove the 5.5 mm screws from both sides of the camera/speaker with a Phillips #00 screwdriver.
Step 7
- Use the iFixit opening tool to remove the camera/speaker from the motherboard.
- Practice caution to prevent damage to the attaching ribbon.
Use the iFixit opening tool to remove the camera/speaker from the motherboard.
Practice caution to prevent damage to the attaching ribbon.
Step 8
- Use the iFixit opening tool to gently pry the camera/speaker off.
Use the iFixit opening tool to gently pry the camera/speaker off.
Step 9
Motherboard
- Use the iFixit opening tool to remove the yellow tab on the motherboard.
Use the iFixit opening tool to remove the yellow tab on the motherboard.
Step 10
- Use the iFixit opening tool to remove the other orange tab to free the motherboard.
Use the iFixit opening tool to remove the other orange tab to free the motherboard.
Step 11
- To completely remove the motherboard, use the iFixit opening tool to leverage it up, then use your fingers to pull it out.
- Do not be alarmed if the volume and hold buttons are removed from the motherboard.
To completely remove the motherboard, use the iFixit opening tool to leverage it up, then use your fingers to pull it out.
Do not be alarmed if the volume and hold buttons are removed from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 10 other contributors
Renee Kuzniar
Member since: 04/13/2010
82 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 6-18, Maness Spring 2010
Member of Cal Poly, Team 6-18, Maness Spring 2010
CPSU-MANESS-S10S6G18
3 Members
12 Guides authored