Difficulty

Moderate

Steps

10

Time Required

                          15 minutes

Sections

2

  • Removing Back Cover
  • 5 steps
  • Camera Lens
  • 5 steps

Flags

0

  • BackSamsung L100

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removing Back Cover
  • Remove the six external screws from the camera using a Phillips #0 screwdriver.
  • After the screws has been removed, the bottom of the back half of the external case should be loosened from the camera.
  • Be careful, make sure you don’t lose the screws.

Remove the six external screws from the camera using a Phillips #0 screwdriver.

After the screws has been removed, the bottom of the back half of the external case should be loosened from the camera.

Be careful, make sure you don’t lose the screws.

1024

Step 2

  • Open the battery cover that’s located on the bottom right side of the camera and carefully remove the battery.

Open the battery cover that’s located on the bottom right side of the camera and carefully remove the battery.

Step 3

  • Slide your fingernail or a plastic spudger in the groove from the bottom to the top right side of the camera.

Slide your fingernail or a plastic spudger in the groove from the bottom to the top right side of the camera.

Step 4

  • Carefully squeeze the top right corner of the camera and pry off the external cover.
  • If you hear a “cracking” sound. This is normal.
  • Continue to pull the external cover and it will come off cleanly.
  • Be cautious of the flash capacitor. It carries an electrical charge, that may give you an unpleasant shock.

Carefully squeeze the top right corner of the camera and pry off the external cover.

If you hear a “cracking” sound. This is normal.

Continue to pull the external cover and it will come off cleanly.

Be cautious of the flash capacitor. It carries an electrical charge, that may give you an unpleasant shock.

Step 5

  • Carefully pull off the back cover, parts behind the back of the case might fall out.

Carefully pull off the back cover, parts behind the back of the case might fall out.

Step 6

              Camera Lens
  • Remove the front cover, it comes off easily.
  • Buttons might fall out when you remove the front cover.

Remove the front cover, it comes off easily.

Buttons might fall out when you remove the front cover.

Step 7

  • Remove green tape from ribbon.

Remove green tape from ribbon.

Step 8

  • Remove four screws around lens.

Remove four screws around lens.

Step 9

  • Use spudger to remove ribbon connecting the circuit board from lens.

Use spudger to remove ribbon connecting the circuit board from lens.

Step 10

  • Remove lens from camera.

Remove lens from camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 6 other contributors 


                    Adriel

Member since: 04/15/2010

120 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 6-17, Maness Spring 2010                        

                                                  Member of Cal Poly, Team 6-17, Maness Spring 2010 



                    CPSU-MANESS-S10S6G17                     


                                            4 Members                     


                                            10 Guides authored